First Time Operation - Radio Shack Guardian Operating Manual

First Time Operation

To Operate the Detector,
1) Install the Batteries
a. Use a 9-volt ALKALINE battery only
b. Install battery with correct polarity
(align "+" on detector housing with "+" on battery)
c. The battery cover opens and closes with a coin or screwdriver
2) Set the On switch to "ON"
"ON" is the middle position
3) Set the Audio/Vibrate Switch to "AUDIO"
4) Sweep the Detector over the target area.
Detector must be IN MOTION to detect metal
5) Read this manual for proper training in the detection of metal objects