Advertisement
Quick Links
Advertisement
Related Manuals for Radio Shack Guardian
Summary of Contents for Radio Shack Guardian
- Page 1 OPERATING MANUAL ® The Guardian Hand Held Security Metal Detector...
- Page 2 OPERATOR DETECTION ALERTS INTERFERENCE ELIMINATION FEATURES • Audio Alert – High Pitch Sound • 3 Operating frequency Selections • Vibration Alert - Silent Operation • Eliminate signals from very small metal objects • LED Target Indicator - Red • Minimizes interference from environmental metal objects COMFORT GRIP MOMENTARY LOW OPERATION...
- Page 3 b) Large environmental metal objects, such as the metal reinforcing bars in floors, will not be detected beyond a range of several inches. Upon release of the "Momentary Low" switch, the detector will return to Normal Operation. 4. Silent Operation Position the Silent/Audio switch in the "Silent/Vibrate"...
-
Page 4: First Time Operation
First Time Operation To Operate the Detector, 1) Install the Batteries a. Use a 9-volt ALKALINE battery only b. Install battery with correct polarity (align "+" on detector housing with "+" on battery) c. The battery cover opens and closes with a coin or screwdriver 2) Set the On switch to "ON"... - Page 5 The detector will continue to operate, at a lower sensitivity, when the Low Battery Indicators are activated. Replace batteries as soon as possible after these indicators activate. If you plan to store the GUARDIAN™ for several days or more, remove the battery.
-
Page 6: Led Indicators
Power Switch with Momentary Low The Power switch has 2 "ON" positions and a forward "OFF" position. The detector is OFF with the switch in the "UP" position The detector is ON with the switch in the "MIDDLE" position Momentary The detector is in MOMENTARY LOW operation with the switch held in the "DOWN"... - Page 7 Body Scanning for the Detection of Metal Objects Always test the detector before operation. Sweep the detector across a known metal object, and verify detection with audio, vibratory, and visual feedback. Motion is Required: The metal detector must be IN MOTION, sweeping across the target area, to detect the presence of metal.
- Page 8 In the event of a product defect during the warranty period, take the product and the Radio Shack sales receipt as proof of purchase date to any Radio Shack store. Radio Shack will, at its option, unless otherwise provided by law: (a) correct the detect by product repair without charge for parts and labor;...