Advertisement
2. If your TV (or FM receiver) has an F-con-
nector:
a. Connect one end of the supplied
coaxial cable to your TV (or FM
receiver).
b. Connect the other end of the cable to
the antenna's
TO TV
If your TV set (or FM receiver) does not
have an F-connector:
TV
a. Connect one end of the supplied
coaxial cable to the F-connector in a
transformer/splitter (not supplied).
b. Connect the other end of the cable to
the antenna's
TO TV
c. Connect
the
transformer/splitter's
brown 300-ohm twinlead to your TV's
(or FM receiver's) VHF terminal
screws.
Cautions:
TO TV
TV
• Always connect the AC adapter to the
jack.
3. Insert the supplied AC adapter's small
TO TV
4. Plug the AC adapter into a standard AC
jack.
2
d. Connect
the
transformer/splitter's
gold 300-ohm twinlead to your TV's
(or FM receiver's) UHF terminal
screws.
You must use a Class 2 power
!
source that supplies 12V DC
and delivers at least 100 mA.
Its center tip must be set to positive and
its plug must fit the antenna's
jack. The supplied adapter meets
100MA
these specifications. Using an adapter
that does not meet these specifications
could damage the antenna or the
adapter.
antenna before you connect it to AC
power. When you finish, disconnect the
adapter from AC power before you dis-
connect it from the antenna.
barrel plug into the
12VDC 100mA
the back of the antenna's base.
12VDC
100mA Jack
outlet.
12VDC
jack on
Advertisement
