Pedestrian Mode; Free Map Browsing; Map Settings - Invion GPS-4V2 Instruction Manual

Pedestrian Mode

The Pedestrian Mode button lets you toggle between traveling as a
pedestrian or in a vehicle. When in Pedestrian Mode, you can generate
a route up to ten miles and you are not limited by vehicle constraints,
such as one way streets. When creating a pedestrian route, the
software avoids motorways or other roads where pedestrians would
not travel. Voice prompts are deactivated in this mode.

Free Map Browsing

This feature lets you browse the map without the GPS receiver
returning you to your current location. Tap the Free Map Browsing
button to disconnect from the GPS receiver.
When you are ready to reconnect to the GPS receiver, go to the
Settings menu and tap the
From the GPS signal screen, tap the
Units of Measure
You can tap the Units of Measure button to specify the measurement
system you would want to use.
You can select:
• Miles/Yards
• Miles, 10th of a Mile
• Kilometers/Meters

Map Settings

You can tap the Map Settings button to customize your map display.
button.
5
button.