Power Assist Steps - Chevrolet Tahoe 2012 Owner's Manual

Hide thumbs Also See for Tahoe 2012:
Table of Contents

Advertisement

2-14
Keys, Doors, and Windows
If
on the RKEtransmitter or
on the liftgate is pressed while
power operation is disabled, the
lamps will flash three times, but the
liftgate will not move.
It is not recommended to drive with
the liftgate open, however, when
driving with the liftgate open; the
liftgate should be set to manual
operation by pressing OFFon the
liftgate switch on the center console.
The liftgate has an electric latch.
If the battery is disconnected or has
low voltage, the liftgate will not
open. The liftgate will resume
operation when the battery is
reconnected and charged.
If the battery is properly connected
with adequate voltage, the switch is
not disabled, and the liftgate still will
not function, see a dealer for
service.
Liftglass
If equipped, there are two ways to
open the liftglass:
Press the button on the
underside of the license plate
applique (A).
Press
on the
RKEtransmitter.

Power Assist Steps

The vehicle may have power assist
steps. To enable or disable the
power assist steps push
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Suburban 2012

Table of Contents