Phone - Chevrolet Tahoe 2012 Owner's Manual

1. Press and hold /
two seconds.
2. Say Bluetooth. This command
can be skipped.
3. Say Pair. The system responds
with instructions and a four digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
the cell phone manufacturer's
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3. After the
PIN is successfully entered, the
system prompts you to provide a
name for the paired cell phone.
This name will be used to
indicate which phones are
for
paired and connected to the
vehicle. The system responds
with <phone name> has been
successfully paired after the
pairing process is complete.
6. Repeat Steps 1 through 5 to pair
additional phones.
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with is connected
after that phone name.
1. Press and hold
two seconds.
2. Say Bluetooth.
3. Say List.
If the phone name you want to
delete is unknown, see Listing All
Paired and Connected Phones.
1. Press and hold
two seconds.
2. Say Bluetooth.
3. Say Delete. The system asks
which phone to delete.
4. Say the name of the phone you
want to delete.
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
/ for
order in which all the available cell
phones were paired. Depending on
which cell phone you want to
connect to, you may have to use
this command several times.
1. Press and hold
two seconds.
2. Say Bluetooth.
/ for
/ for