Table of Contents
Advertisement
3.1.8
Adjusting the monitoring settings
The ARC application allows you to adjust the remote server monitoring settings
including SEL polling, SDR reading, ASF, and PET.
To adjust the monitoring settings:
Click Server on the menu bar,
1.
then select General Setting from
the drop-down menu. A Server
Settings window appears.
2.
Click on the up/down arrow
button after each setting to
adjust the value.
3.
Click OK to save your changes
and close the window;
otherwise, click Cancel to ignore
your changes.
3-14
Chapter 3: Software support
Advertisement
Table of Contents
