1. Manuals
  2. Brands
  3. AirLive Manuals
  4. Print Server
  5. WFP-101UV2
  6. User manual

AirLive WFP-101UV2 User Manual

Wireless multi-function print server
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WFP-101U v2
Wireless Multi-function
Print Server
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WFP-101UV2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AirLive WFP-101UV2

Summary of Contents for AirLive WFP-101UV2

  • Page 1 WFP-101U v2 Wireless Multi-function Print Server User’s Manual...

  • Page 2: Declaration Of Conformity

    OvisLink Corp. 5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product Wireless Multi-function Print Server AirLive WFP-101U v2 is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause Description Electromagnetic compatibility and Radio spectrum Matters (ERM);...
  • Page 3 Directiva 1999/5/CE. disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ OvisLink Corp izjavlja, da je ta AirLive WFP-101U v2 Ελληνική [Greek] ΟΤΙ AirLive WFP-101U v2 ΣΥΜΜΟΡΦΩΝΕΤΑΙ Slovensko v skladu z bistvenimi zahtevami in ostalimi ΠΡΟΣ...
  • Page 4 Copyright ©2007/2008 this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
  • Page 5 FCC Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment.
  • Page 6 Equipment) As of April 8, 2000. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.

  • Page 7: Table Of Contents

    Table of Contents INTRODUCTION ........................1 CHAPTER 1: MFP SERVER MODES ................... 2 CHAPTER 2: MFP SERVER INSTALLATION IN WINDOWS 2000/XP........ 4 ..............4 ARDWARE NSTALLATION ROCEDURE ............... 5 OFTWARE NSTALLATION ROCEDURE MFP S .................... 14 ERVER TILITIES MFP D ...............
  • Page 8 ..................51 SERVER ANAGEMENT 5.10 ........................52 EPORT CHAPTER 6: WEB MANAGEMENT ................... 53 ......................53 NTRODUCTION ........................54 OGIN ......................55 EVICE TATUS 6.3.1 System Status ....................55 6.3.2 Printer Status....................56 6.3.3 TCP/IP Status....................57 ......................58 ETUP IZARD 6.4.1 System ......................

  • Page 9: Introduction

    802.11g/b wireless network or wired network. Package Content: This package contains the following components: One MFP Server One Antenna One Power Adapter One Quick Installation Guide One CD-ROM (Including all the software utilities, drivers and User’s Manual) AirLive WFP-101U v2 User’s Manual...

  • Page 10: Chapter 1: Mfp Server Modes

    XP SP1 and above, and Windows Vista 32 and Vista 64. The all-in-one MFP server mode doesn’t support Windows 98SE/ME/NT, Linux/Unix or MAC OS. For the detailed instructions, please refer to the following chapters. Chapter 3: Using the all-in-one printer Chapter 4: MFP Manager AirLive WFP-101U v2 User’s Manual...
  • Page 11 MAC OS 9.x and above. For detailed instructions, please refer to the following chapters. Chapter 7: LPR Printing Chapter 8: RAW Printing Chapter 9: IPP Printing Chapter 10: MFP server Installation in MAC OS AirLive WFP-101U v2 User’s Manual...

  • Page 12: Chapter 2: Mfp Server Installation In Windows 2000/Xp

    NOT use any other power adapter from other sources. To prevent the compatibility problem between MFP Server and a few MFP or printer, it is recommended that you power on the MFP Server before the MFP or printer. AirLive WFP-101U v2 User’s Manual...

  • Page 13: Software Installation Procedure

    1. Insert the CD shipped along with the MFP Server into your CD-ROM drive. The Autorun.exe program should be executed automatically. If not, run Autorun.exe manually from CD-ROM drive’s root directory 2. The following screen will be displayed. Click “ Install Driver and Utility”. AirLive WFP-101U v2 User’s Manual...

  • Page 14: Install The

    3. The “MFP Server Utilities - InstallShield Wizard” is displayed, click "Next". 4. Click “Next” to install the MFP Server utilities in the default folder or click “Change” to specify the destination folder where you would like to install the MFP Server utilities. AirLive WFP-101U v2 User’s Manual...
  • Page 15 MFP Server, please click “”Next” directly. Or you can select “No, I will configure the MFP Server later” and click “Next” to complete the installation. The following steps are for MFP Server Configuration. AirLive WFP-101U v2 User’s Manual...
  • Page 16 8. The MFP Server List will auto search the MFP Servers in the network. Select the MFP Server you wan to setup and click “Next” to continue. AirLive WFP-101U v2 User’s Manual...
  • Page 17 IP Address: 192.168.2.2 Subnet Mask: 255.255.255.0 If you have selected “DHCP”, the MFP Server will try to determine your network settings automatically. If a DHCP Server is present within the AirLive WFP-101U v2 User’s Manual...

  • Page 18: Wireles

    MFP Server to your wireless router, access point, or point-to-point ad-hoc connection. The MFP Server will automatically scan the wireless networks nearby. Please select the appropriate wireless network that you would like to connect from the list and click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 19 Settings” screen will be appeared. You have to select the “Security Mode” and enter the key the same as the settings on your wireless devices. For more information about the security settings, please refer to the Section 6.8. AirLive WFP-101U v2 User’s Manual...
  • Page 20 14. The configurations are finished. Please click “Finish” to apply new settings. 15. Click “Finish” to complete the installation. Note: If the Windows XP Firewall in your system has been enabled, the MFP Server will automatically open ports for the MFP Server programs AirLive WFP-101U v2 User’s Manual...
  • Page 21 MFP Server is connected to a wired LAN network through the attached Ethernet cable. If yes, it will work in wired network. To enable the wireless setting, please remove the Ethernet cable. For more detailed information about wireless setting, please refer to Section 6.8. AirLive WFP-101U v2 User’s Manual...

  • Page 22: Mfp Server Utilities

    It also allows you to manage the MFP Server. Uninstall – Assistant for removing all installed MFP Server software programs. About Version – Display the version of each utility including in the MFP Server software programs. AirLive WFP-101U v2 User’s Manual...

  • Page 23: Install The Mfp Drivers/Utilities

    MFP to your computer. Some MFP requires connecting the MFP to your computer during the installation. Please refer to the below illustration of “HP ALL-In-One Series” which is the screen displayed during the installation. AirLive WFP-101U v2 User’s Manual...
  • Page 24 1. Select the MFP that you wan to install in the “MFP Server List” and click “Connect” button. 2. The Windows will detect the new hardware and prompt to install the MFP AirLive WFP-101U v2 User’s Manual...
  • Page 25 CD of the MFP and designated to find drivers in the After you have completed the MFP installation, you will see the MFP is added to the “Printers and Faxes” in Windows. AirLive WFP-101U v2 User’s Manual...

  • Page 26: Mfp Drivers/Utilities Has Been Installed

    3. After the installation, a copy of the MFP will be added to the “Printers and Faxes” in Windows. Tip : The new copy of the MFP is bundled to the MFP Server. Please use the MFP to share print, scan, card reader or fax functions through the network. AirLive WFP-101U v2 User’s Manual...
  • Page 27 AirLive WFP-101U v2 User’s Manual...

  • Page 28: Chapter 3: Using Your All-In-One

    To scan or read the memory card, please follow the steps below for using your all-in-one printer. 1. Click “Start” menu and select “MFP Server Utilities\MFP Manager” in “All Programs”. 2. In the “MFP Manager”, select the all-in-one printer you would like to use. AirLive WFP-101U v2 User’s Manual...

  • Page 29: Reading

    4. You are able to use the all-in-one printer for printing, scanning or reading the memory card over the MFP server. Tip: If you have finished using the all-in-one printer, please click “Disconnect” to release it. Other users can’t use the all-in-one printer until it is released. AirLive WFP-101U v2 User’s Manual...

  • Page 30: Printing

    If you have sent a print job to it while the all-in-one printer is connecting to another user, you may be prompted that the device is not found or the document failed to print. Please resend the print job after the all-in-one printer is idle or not connected. AirLive WFP-101U v2 User’s Manual...

  • Page 31: Scanning

    In Windows XP/Vista, you can also scan from the Windows XP/Vista scanning utility or use third party scanning utilities such as Photoshop, Photoimpact, Paint Shop Pro, etc. An example: EPSON CX-8400/9400 Series Utilities AirLive WFP-101U v2 User’s Manual...
  • Page 32 Windows XP Scanning Utility AirLive WFP-101U v2 User’s Manual...

  • Page 33: Reading Memory Cards

    Reading Memory Cards You can read the files from a memory card through the MFP server. AirLive WFP-101U v2 User’s Manual...

  • Page 34: Chapter 4: Mfp Manager

    If you unplug the USB cable or turn off the all-in-one printer, the device will not display in the list. After you reconnect the USB cable or turn on the all-in-one printer, you have to click the “Refresh” and “Connect” buttons in the “MFP Manager” to recover the connection. AirLive WFP-101U v2 User’s Manual...
  • Page 35 When the status is “Idle”, it indicates that the all-in-one printer is not being used. When the status is “Busy”, it indicates that another user is using the all-in-one printer to scan, print, etc. AirLive WFP-101U v2 User’s Manual...
  • Page 36 By default, it is enabled to auto release the all-in-one printer after five minutes. You can set the time period longer; the maximum setting is 255 minutes. AirLive WFP-101U v2 User’s Manual...

  • Page 37: My Favorite

    The information listed here is the same as on the MFP Information Server List. Please refer to Section 4.1. Refresh Refresh the “MFP Server List” immediately. Connect Let the all-in-one printer be connected to your computer. AirLive WFP-101U v2 User’s Manual...
  • Page 38 By default, it is enabled to auto release the all-in-one printer after five minutes. You can set the time period longer; the maximum setting is 255 minutes. AirLive WFP-101U v2 User’s Manual...

  • Page 39: Auto Connect List

    Please follow the message to retry, and the printer will queue your printing job in your computer spooler. The MFP server will then print the job after the all-in-one printer is idle or disconnected. AirLive WFP-101U v2 User’s Manual...
  • Page 40 1. Click “Add” from the “Auto Connect List”. 2. The MFP servers within the network will be displayed in the following screen. Select the MFP server you would like to add to the list. AirLive WFP-101U v2 User’s Manual...
  • Page 41 “Keep connecting for 30 second(s) after printing has been finished (5-60)” is enabled by default. It will help to avoid this kind of situation. 4. The setup is finished. AirLive WFP-101U v2 User’s Manual...

  • Page 42: Quick Setup

    “Idle” indicates that the all-in-one printer is free to use by any users. Connect If the all-in-one printer is free to use, “Connect” will be available. Otherwise it will be grayed out. AirLive WFP-101U v2 User’s Manual...
  • Page 43 Disconnect the selected all-in-one printer. “Disconnect” will be available only for the current user. Information To check more information about the MFP server and the all-in-one printer, please click this button. The information will be listed as the illustration above. AirLive WFP-101U v2 User’s Manual...

  • Page 44: Option Settings

    ENABLED. Your Contract Enter your contact information here. When you Information connect to the all-in-one printer, your contact information will be displayed on the right side of the program for other users to contact you. AirLive WFP-101U v2 User’s Manual...

  • Page 45: Search For Mfp Server

    “Remote MFP Server List” will be added to the “MFP Server List” for you to configure. Note: If the remote MFP server you have searched is behind a NAT Router, the MFP server may not operate normally. AirLive WFP-101U v2 User’s Manual...

  • Page 46: Chapter 5: Server Configuration

    MFP Server Management: For administrators to manage the MFP server. Administrators can force disconnect the current connection of the MFP server. Report: List the information of All Available MFP servers on the Network. We will explain each function separately in the following section. AirLive WFP-101U v2 User’s Manual...

  • Page 47: Search For All Available Mfp Server

    “Server Group” on the left side of the window. You must select the MFP server you would like to configure from the list. The system will, at the same time, display the selected MFP server’s status on the right side of the window. AirLive WFP-101U v2 User’s Manual...

  • Page 48: Status Of Mfp Server

    Version, status of each server port, IP address, subnet mask, default gateway and supported printing protocols…etc. You can refresh the MFP server’s status by pressing the “Refresh” button You can restart the MFP server by pressing the “Reboot” button AirLive WFP-101U v2 User’s Manual...

  • Page 49: Set Up The Mfp Server

    “User Name” and “Password” of the MFP server. The default values are: User Name: admin, Password: 1234. Tip: When you have finished the settings, please click “ ” to restart the MFP server to let the settings take effect. AirLive WFP-101U v2 User’s Manual...

  • Page 50: General Configuration

    General Configuration Double-click the “General” icon, the login window will popup and enter user name and password, the default setting is ‘’admin’’ and ‘’airlive’’. After entering the username and password the General configuration window will popup. You can see basic MFP server information on this page. You also can configure the “Server Name”, “User Name”...

  • Page 51: Tcp/Ip Configuration

    Auto IP – The IP Address information of the MFP server obtained from a DHCP Server will be displayed in the address field. If no DHCP Server is present, you have to assign the information manually. AirLive WFP-101U v2 User’s Manual...

  • Page 52: System Configuration

    Upgrade Firmware: You can use this “Upgrade Firmware” tool to update to the newest firmware of the MFP server. Click “ ” button and select the correct firmware in your PC. After selecting the firmware file, click the “Upgrade” button to finish the firmware update process. AirLive WFP-101U v2 User’s Manual...
  • Page 53 Generally, the channels are from 1 to 11 in the USA and from 1 to 13 in Europe. The operating channel will be set to the MFP server before importing. If you are in different a country, please make sure that you have set the available channels according to your location. AirLive WFP-101U v2 User’s Manual...

  • Page 54: Wireless Configuration

    You can let the MFP server scan for an available access point automatically or manually assign the SSID of the access point you want to use. If you select to let the MFP server scan for an available access point, the following window will pop up. AirLive WFP-101U v2 User’s Manual...
  • Page 55 You have to go through the following procedure: This MFP server supports WEP, WPA-PSK and WPA2-PSK security mode. If you want to use WEP encryption to protect your wireless network, you have to select “WEP(ASCII)” or “WEP(HEX)”. The wireless security setting should AirLive WFP-101U v2 User’s Manual...
  • Page 56 WEP Security Mode: You can select “64 bit” or “128 bit” length and “Hexadecimal” or “ASCII” format for the encryption key. Longer key length can provide stronger security but worse communication performance. AirLive WFP-101U v2 User’s Manual...
  • Page 57 “WPA-PSK” requires users to select advanced encryption methods, i.e. TKIP or AES, and enter a set of key. TKIP – TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets. This insures much greater security than the standard WEP security. AirLive WFP-101U v2 User’s Manual...
  • Page 58 If you manually assign the IP settings, you have to enter the IP address, subnet mask and default gateway address. When you finish configuring the IP settings, click “Next” to confirm the IP Address configuration. AirLive WFP-101U v2 User’s Manual...

  • Page 59: Mfp Server Management

    This is very useful when a user forgets to disconnect the all-in-one printer. The administrator can release the connection and let the all-in-one printer be free to use. AirLive WFP-101U v2 User’s Manual...

  • Page 60: 5.10 Report

    The Report window will pop up. The report lists basic information the all available MFP servers on the network. The information includes Device Name, MAC ID, Model Type and Firmware Version of MFP server. AirLive WFP-101U v2 User’s Manual...

  • Page 61: Chapter 6: Web Management

    Simply enter the MFP server’s IP address into your browser’s address field to manage a MFP server by through its built-in Web Server. The default IP Address, User Name and Password settings of the MFP server are as follows. IP Address: 192.168.2.2 User Name: admin Password: airlive AirLive WFP-101U v2 User’s Manual...

  • Page 62: Login

    MFP server. After entering the IP address of the MFP server, a login page displays. You have to enter the correct “User Name” and “Password” before going to the Web Management pages. Note: Default User Name is “admin”, default password is “1234”. AirLive WFP-101U v2 User’s Manual...

  • Page 63: Device Status

    Device Status 6.3.1 System Status System Information includes “Device Name”, “MFP server Name”, “Model Type”, “Firmware Version”, “MAC Address”, “Wireless Configuration”, and the protocols enabled status, etc. AirLive WFP-101U v2 User’s Manual...

  • Page 64: Printer Status

    Off Line: the all-in-one printer or printer is not connected to MFP server through a USB cable, or it is turned off. Paper Out: the all-in-one printer or printer is not connected by a user and is out of paper. AirLive WFP-101U v2 User’s Manual...

  • Page 65: Tcp/Ip Status

    6.3.3 TCP/IP Status This page lists all TCP/IP settings of the MFP server including “IP Address”, “Subnet Mask” and “Gateway”. It also can tell whether the DHCP server is “On” or “Off”. AirLive WFP-101U v2 User’s Manual...

  • Page 66: Setup Wizard

    MFP Server Name: the name of the MFP Server. You can use this name to identify the MFP server when you are searching for if using by the “Server Manager” utilities. PORT Name: The name of the port which MFP server plugs on. The default port name is ‘’p1’’. AirLive WFP-101U v2 User’s Manual...
  • Page 67 Password: enter the password you want to change for the MFP Server. The password can be up to 7-6 digits in alphanumeric format. The default password is “1234”. Re-type Password: enter the same password for the MFP Server again. AirLive WFP-101U v2 User’s Manual...
  • Page 68 6.4.1.2 Advanced Settings TCP/IP Printing (LPR/IPP/RAW): The MFP server supports TCP/IP network protocol and LPR/IPP/RAW printing protocols. By default these protocols are enabled. AirLive WFP-101U v2 User’s Manual...

  • Page 69: Wireless

    LAN mode. It cannot work in both Ethernet and wireless LAN mode at the same time. When the MFP server starts up, it will auto-detect if the LAN port is connected to an active network by an Ethernet cable. If the MFP server AirLive WFP-101U v2 User’s Manual...
  • Page 70 WLANs. Please make sure that the ESSID of all stations and access points in the same WLAN network are the same. Channel Number the channel of MFP server is fixed on channel 11. AirLive WFP-101U v2 User’s Manual...
  • Page 71 Wireless page to manually set up the wireless parameters. There is “WLAN Function” setting lets you to set up Auto/Disable/Enable wireless function of the MFP server. Please refer to section 7.4.2 to know more about the setting. AirLive WFP-101U v2 User’s Manual...
  • Page 72 WEP encryption keys for the MFP server. Default Key – Select one of the four keys to encrypt your data. Only the key you select in the “Default key” will take effect. AirLive WFP-101U v2 User’s Manual...
  • Page 73 5-digit ASCII characters as the encryption keys. For example: “0123456aef“ or “Guest“. 128-bit WEP: input 26-digit Hex values (in the "A-F", "a-f" and "0-9" range) or 10-digit ASCII characters as the encryption keys. For example: “01234567890123456789abcdef“ or “administrator“. AirLive WFP-101U v2 User’s Manual...
  • Page 74 WPA Pre-Shared key – Enter 8 to 63 digits of ASCII format to be the key for authentication within the network. When you finish configuring the wireless security, click “Save & Next” to confirm the configuration. AirLive WFP-101U v2 User’s Manual...
  • Page 75 WPA Pre-Shared Key –Enter 8 to 63 digits of ASCII format to be the key for authentication within the network. When you finish configuring the wireless security, click “Save & Next” to confirm the configuration. AirLive WFP-101U v2 User’s Manual...

  • Page 76: Tcp/Ip

    If you need the MFP server to automatically get an IP address from a DHCP server, select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/ BOOTP)”. You also can select “Disable Use the following TCP/IP Settings” to manually assign an “IP Address”, “Subnet Mask” and “Gateway” for the MFP server. AirLive WFP-101U v2 User’s Manual...

  • Page 77: Save Settings

    6.4.4 Save Settings After configuring the MFP server, you have to click “Save Settings” to save the settings and restart the system. AirLive WFP-101U v2 User’s Manual...

  • Page 78: System Tools

    System Tools 6.5.1 Load Default You can use this page to restore the factory default settings. All of your previous setting will be cleared. AirLive WFP-101U v2 User’s Manual...

  • Page 79: Upgrade Firmware

    “OK”. The firmware will be updated in several minutes. Be aware that if you have started upgrading firmware, you have to follow all the upgrading steps or the MFP server can’t return to normal configuration. AirLive WFP-101U v2 User’s Manual...

  • Page 80: Chapter 7: Lpr Printing

    Note that the following procedures are running in Windows XP. For Windows 2000/2003/Vista, the procedures are similar. 1. Click “Start”, choose “Settings” and select “Printers and Faxes”. 2. Click “Add a Printer”. 3. The “Add Printer Wizard” is displayed. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 81 4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “Standard TCP/IP Port”. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 82 6. Please make sure that the MFP server and the all-in-one printer or Printer have turned on and connected to the network correctly before you continue. Click “Next”. 7. Enter the IP Address of the MFP server in the “Printer Name or IP Address field”. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 83 8. Select “Custom” and click “Settings”. When you have finished the settings at step 9, click “Next” to continue. 9. Select “LPR” and enter “p1” in the “Queue Name”, then click “OK”. By default the queue name of the MFP server is “p1”. AirLive WFP-101U v2 User’s Manual...
  • Page 84 11. Select the manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list. AirLive WFP-101U v2 User’s Manual...
  • Page 85 12. Choose whether to set the printer as the default printer or not. Click “Next”. 13. Choose to print a test page or not. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 86 In Windows Vista, you have to close the “Bi-directional” function for better compatibility with some printers. Please click “Start” menu and select “Printers” in “Settings”. In the Printers screen, right click the printer and select “Properties”. In the Properties screen, please disable bidirectional support. AirLive WFP-101U v2 User’s Manual...

  • Page 87: Chapter 8 : Raw Printing

    Note that the following procedures are running in Windows XP. For Windows 2000/2003, the procedures are similar. 1. Click “Start”, choose “Settings” and select “Printers and Faxes”. 2. Click “Add a Printer”. 3. The “Add Printer Wizard” is displayed. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 88 4. Select “Local Printer attached to this computer” and click “Next”. 5. Choose “Create a new port” and “Standard TCP/IP Port”. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 89 6. Please make sure that the MFP server and the all-in-one printer or Printer are turned on and connected to the network correctly before you continue. Click “Next”. 7. Enter the IP Address of the MFP server in the “Printer Name or IP Address” field. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 90 8. Select “Custom” and click “Settings”. When you have finished the settings at step 9, click “Next” to continue. Select “RAW” and then click “OK”. AirLive WFP-101U v2 User’s Manual...
  • Page 91 11. Select the manufacturer and the printer model and click “Next”. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list. AirLive WFP-101U v2 User’s Manual...
  • Page 92 12. Choose whether to set the print as the default printer or not. Click “Next”. 13. Choose to print a test page or not. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 93 14. You have added the network printer to the PC successfully. The information for the printer is displayed in the windows. Click “Finish”. AirLive WFP-101U v2 User’s Manual...

  • Page 94: Chapter 9: Ipp Printing

    9.2.2 Client Side You only need to perform the Windows standard Add New Printer procedure. 1. Click “Start”, choose “Settings” and select “Printers and Faxes”. 2. Click “Add a Printer”. AirLive WFP-101U v2 User’s Manual...
  • Page 95 3. The “Add Printer Wizard” is displayed. Click “Next”. 4. Select “A network printer, or a printer attached to another computer”. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 96 Port Name is the port name of the MFP server that your printer is connected to. The default port name is “p1”. One example of the URL is http://192.168.2.2:631/p1. After entering the URL of the MFP server, click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 97 “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list. 7. Choose whether set the print as the default printer or not. Click “Next”. AirLive WFP-101U v2 User’s Manual...
  • Page 98 8. You have added the network printer to the PC successfully. The information for the printer is displayed in the windows. Click “Finish”. AirLive WFP-101U v2 User’s Manual...

  • Page 99: Chapter 10: Mfp Server Installation In Mac Os

    Location: You can enter the location of the all-in-one printer or printer. Printer: Select the all-in-one printer or printer model that is attached to the MFP server. 5. Click “Add” to complete the all-in-one printer or printer installation. AirLive WFP-101U v2 User’s Manual...

  • Page 100: Mac 10.3

    10.2 MAC 10.3.x To enable LPR Printing in Macintosh 10.3.x, please follow the procedures below. 1. In the Desktop, click “System Preferences”. 2. Click “Print & Fax”. AirLive WFP-101U v2 User’s Manual...
  • Page 101 3. From the “Print & Fax” screen, click “Set Up Printers…”. 4. Click “Add” to add the new MFP server through TCP/IP. AirLive WFP-101U v2 User’s Manual...
  • Page 102 Printer Address: Input the IP Address of the MFP server Queue Name: The queue name of the MFP server is “p1”. Printer Model: Select the all-in-one printer or Printer Model that is attached to the MFP server. AirLive WFP-101U v2 User’s Manual...
  • Page 103 6. The MFP server is installed completely. You can see it in the “Printer List”. 7. You can print a file to check whether the MFP server is installed successfully. AirLive WFP-101U v2 User’s Manual...

  • Page 104: Chapter 11: Troubleshooting

    2. Select “Static IP” and enter the IP Address and Subnet Mask that match your computer. Click “Save”. 3. Reboot the MFP server. Note: Setting a static IP Address for MFP server is recommended since DHCP assignment may dramatically change the IP Address of the MFP server. AirLive WFP-101U v2 User’s Manual...
  • Page 105 MFP server programs to the exception list of your firewall. The programs are as follows. 1. Add the “servoap.exe” program to the exception list. 2. Add “mfpagent.exe” program to the exception list. AirLive WFP-101U v2 User’s Manual...
  • Page 106 Windows spooler when there is a PC which is the connected with MFP server. Disable “Bi-Directional Support”. Please follow the steps below. 1. Right click the printer from the “Printer and Faxes” utility in Windows. 2. Select “Properties” and select “Ports”. 3. Uncheck “Enable bidirectional support “. AirLive WFP-101U v2 User’s Manual...

Table of Contents