1. Manuals
  2. Brands
  3. AirLive Manuals
  4. Print Server
  5. WP-201G V2
  6. User manual

AirLive WP-201G V2 User Manual

802.11g wireless usb print server
Hide thumbs
Table of Contents

Advertisement

Quick Links

WP-201G v2
802.11g Wireless USB
Print Server
User's Manual
AirLive WP-201G v2 User's Manual
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WP-201G V2 and is the answer not in the manual?

Questions and answers

Related Manuals for AirLive WP-201G V2

Summary of Contents for AirLive WP-201G V2

  • Page 1 WP-201G v2 802.11g Wireless USB Print Server User’s Manual AirLive WP-201G v2 User’s Manual...

  • Page 2: Declaration Of Conformity

    5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product 802.11g Wireless USB2.0 Print Server AirLive WP-201G v2 is in conformity with In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive Clause Description Electromagnetic compatibility and Radio spectrum Matters (ERM);...
  • Page 3 Directiva 1999/5/CE. disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ OvisLink Corp izjavlja, da je ta AirLive WP-201G v2 v Ελληνική [Greek] ΟΤΙ AirLive WP-201G v2 ΣΥΜΜΟΡΦΩΝΕΤΑΙ Slovensko skladu z bistvenimi zahtevami in ostalimi relevantnimi ΠΡΟΣ...
  • Page 4 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 5 R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.

  • Page 6: Table Of Contents

    Table of Contents Chapter 1: Introduction....................1 1.1 Product Introduction..........................1 1.2 Product Package ........................... 1 1.3 Networking Printing Architecture ......................1 1.3.1 Print Server Network Functions ....................2 1.3.2 Networking Printing Functions for Clients................. 3 1.3.3 Network Printing Functions for Network Server ............... 5 1.4 Network Printing Environment ......................
  • Page 7 6.4 Verify Print Server’s IP Address ......................35 6.5 Configure Remote LPD Printing on the Host ................... 35 Chapter 7: Configuration Utility ...................37 7.1 Introduction ............................37 7.2 Search for All Available Print Server ....................38 7.3 Status of Print Server.......................... 39 7.4 Setup of the Print Server ........................
  • Page 8 8.4.5 SNMP............................68 8.4.6 NetWare............................68 8.4.7 AppleTalk ............................. 70 8.4.8 Bonjour ............................70 8.4.9 Save Settings ..........................71 8.5 System Tools............................71 8.5.1 Load Default ..........................71 8.5.2 Upgrade Firmware from Browser....................71 8.5.3 Backup Setting..........................72 8.5.4 Restore System........................... 72 Chapter 9: TELNET Management.................73 9.1 Introduction ............................

  • Page 9: Chapter 1: Introduction

    Chapter 1: Introduction 1.1 Product Introduction Thank you for purchasing the AirLive WP-201G v2 Wireless Print Server. The print server will allow your printer to become a shared device on the network. It offers printing flexibility and manageability on your Local Area Network at low costs and offers minimum setup and maintenance.

  • Page 10: Print Server Network Functions

    Windows NT Windows 2000 Windows 98 Workstation Because this print server supports IPX/SPX, NetBEUI, TCP/IP and AppleTalk network protocols, any networked computer can directly print to the print server from any of its installed protocol. AirLive WP-201G v2 User’s Manual...

  • Page 11: Networking Printing Functions For Clients

    Windows 98 Workstation Common operating systems for clients are classified as follows: Windows 98SE/Me/NT/2000/XP/2003/Vista Our print server system provides PTPP (Peer-to-Peer Printing) driver and utilities for Windows 95/98SE/Me/NT/2000/XP/2003/Vista users. PTPP (Peer-to-Peer Printing) supports TCP/IP protocols. AirLive WP-201G v2 User’s Manual...
  • Page 12 UNIX (include HP/UX, SCO Unix, SunOS, Solaris, UnixWare DECUnix, IBM AIX and others) and Linux use the system standard LPR to print through print server. MAC OS MAC OS can use the system standard AppleTalk network to print through the print server. AirLive WP-201G v2 User’s Manual...

  • Page 13: Network Printing Functions For Network Server

    In NetWare environment, the print server offers various printing modes like print queue, remote printer, and etc. 1.4 Network Printing Environment Common network environment are classified as follows: Windows Peer-to-Peer Network The client’s PTPP driver will use TCP/IP protocol to print through the print server. AirLive WP-201G v2 User’s Manual...
  • Page 14 Network printing function will become available after the PTPP driver is installed into Windows NT/2000/2003/Vista. Adding this printing function into Windows NT/2000/2003/Vista Server allows for print queue, user authority management, and many other advanced features to be used. AirLive WP-201G v2 User’s Manual...

  • Page 15: Firmware & Printing Function

    NetWare Network (See below) 1.5 Firmware and Printing Function The print server provides a complete network printing solution. The feature set is listed below. PTPP (Peer-to-Peer Printing) TCP/IP (LPR) IPP Printing NetWare Bindery Printing AppleTalk SMB Printing AirLive WP-201G v2 User’s Manual...

  • Page 16: Chapter 2: Hardware Installation

    Note: The print server MUST use the power adapter that came with the package. Do NOT use any other power adapter from any other sources. Note: To prevent any compatibility problems between the print server and other printers, it is recommended that you power on the print server before the printer. AirLive WP-201G v2 User’s Manual...

  • Page 17: Chapter 3: Windows Peer-To-Peer Network

    The Installation can be performed on Windows 98SE/Me/NT/2000/XP/2003/Vista with the same user interface. Before this installation, please verify that your network protocol is installed on your PC (TCP/IP, IPX and/or NetBEUI). It will be helpful in your installation process. AirLive WP-201G v2 User’s Manual...
  • Page 18 1. Insert the CD that came with the print server into the CD-ROM drive. The Autorun.exe program should be executed automatically. If not, run Autorun.exe manually from CD-ROM drive’s root directory. 2. Click Install Driver And Utility from the Auto-Run menu screen. 3. The “Print Server Utilities” window will be displayed. Click Next. AirLive WP-201G v2 User’s Manual...
  • Page 19 4. Click Next to install the utilities in the default folder or click Change to specify the destination folder where you would like to install the utilities. 5. Select the features you want to install. It is highly recommended to install all provided components. Click Next to continue. AirLive WP-201G v2 User’s Manual...
  • Page 20 6. Now, the Wizard is ready to begin installation, click Install to begin installation. 7. The system will start to install the utilities automatically. AirLive WP-201G v2 User’s Manual...
  • Page 21 Note: If this is the first time you configure the print server, the “Print Server Name” is the last 6-digit of MAC ID with prefix “PS”. Please check the MAC ID on the print server. Note: The list can only display the devices from the same manufacturer. AirLive WP-201G v2 User’s Manual...
  • Page 22 9. Specify a recognizable name for the print server and click Next. 10. Assign the IP Address for the print server manually or click Don’t change to keep default IP Address, i.e. 192.168.2.2 AirLive WP-201G v2 User’s Manual...
  • Page 23 11. Click Finish, the program will add the Network Port of the Print Server to your PC automatically. 12. The Installation procedure is totally completed. Click Finish. AirLive WP-201G v2 User’s Manual...

  • Page 24: Print Server Utilities

    Please refer to Chapter 7 for detailed instructions of the configuration. Remote Ports – Add the network port of remote printer server to your PC. Uninstall – Assistant for removing all installed Print Server Utilities software. AirLive WP-201G v2 User’s Manual...

  • Page 25: Network Ports Quick Setup

    Please be aware that Network Ports Quick Setup Utility can only detect and configure all print servers on other subnets across network segments. You must use Remote Ports Utility as described in the next section to manage remote (across network segments) print server. AirLive WP-201G v2 User’s Manual...

  • Page 26: Remote Ports (Utility)

    Step 1: Run Remote Ports Utility. Click Add to add a remote print port. Step 2: Enter print server’s name and IP address. Select used ports, and enter LPR queue name of each port. Click OK. Step 3: The new remote print port is displayed as follows: AirLive WP-201G v2 User’s Manual...
  • Page 27 In order to use the remote printing function, you will have to proceed with normal Add Printer procedure and select your printer port as the newly added remote printer port. AirLive WP-201G v2 User’s Manual...

  • Page 28: Windows Add Printer Procedure

    1. Click Start, select “Settings/Printers”. 2. Click “Add a Printer”. 3. The “Add Printer” wizard is displayed. Select “Add a local printer”. 4. Choose the suitable printer port which was created by the installation process and click Next. AirLive WP-201G v2 User’s Manual...
  • Page 29 5. Select the printer manufacturer and the printer model and click Next. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list. 6. Name your printer and set the default printer, click Next. AirLive WP-201G v2 User’s Manual...
  • Page 30 7. The printer drivers are being installed. 8. It is recommended to print a test page. Click Finish. AirLive WP-201G v2 User’s Manual...

  • Page 31: Windows Xp

    3.4.2 Windows XP Step 1. Click Start, choose Settings and select “Printers and Faxes”. Step 2. Click “Add a Printer”. Step 3. The “Add Printer Wizard” is displayed. Click Next. AirLive WP-201G v2 User’s Manual...
  • Page 32 Step 4. Select “Local printer attached to this computer” and make sure that “Automatically detect and install my Plug and Play printer” is not selected. Click Next. Step 5. Choose the suitable “Print Server Network Port” which was created by the Administrator Installation or Client Installation process and click Next. AirLive WP-201G v2 User’s Manual...
  • Page 33 Step 6. Select a suitable printer manufacturer and the printer model and click Next. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list. Step 7. Name your printer and setup the default printer, click Next. AirLive WP-201G v2 User’s Manual...
  • Page 34 Step 8. Choose to print the test page or not. It is recommended to print a test page. Click Next. Step 9. You have added the printer to the PC successfully. The information of the printer is displayed in the windows. Click Finish. AirLive WP-201G v2 User’s Manual...

  • Page 35: Chapter 4: Windows Nt/2000/2003 Network

    Other network users can simply connect to the server and access the shared printer (See below). 4.2 Windows NT/2000/2003 Server Installation and Setup Please follow the procedures described below for installation and construct a Peer-to-Peer connection (PTPP) between Windows NT/2000/2003 Server and print server. AirLive WP-201G v2 User’s Manual...
  • Page 36 Please add/configure the Peer-to-Peer Printing of the Windows NT/2000/2003 network printer and verify that you can print from Windows NT/2000/2003 to the print server by the installed PTPP driver. Step 3 Share the above server’s printer to the network by performing the standard Windows printer sharing process. AirLive WP-201G v2 User’s Manual...

  • Page 37: User Installation And Setup

    After server side’s installation is completed, client side will be able to find the server’s shared printer in Network Neighborhood. You only need to perform Window’s standard Add New Printer procedure, select “Network Printer” shown in the screen below, and complete the configurations afterwards to access the shared printer. AirLive WP-201G v2 User’s Manual...

  • Page 38: Chapter 5: Netware Network

    Improve productivity by locating the printer near the workgroup. Each print server should log into a NetWare server before servicing the print jobs. Each print server will occupy a user account with which it can log into the NetWare server. AirLive WP-201G v2 User’s Manual...

  • Page 39: Netware 3.X/4.X/5.X Installation & Setup

    7. Select Print Server Information 8. Press the Insert Key to add a new NetWare print server object. The print server name can be identical to the PSxxxxxx name printed on the label of the print server. AirLive WP-201G v2 User’s Manual...
  • Page 40 Your print server should now be ready to use. You should be able to redirect printing to your print server using a CAPTURE command such as the one shown in the previous section. AirLive WP-201G v2 User’s Manual...

  • Page 41: Chapter 6: Unix System Network

    You can set up the IP address on the various UNIX systems using any one of the following methods: 1. DHCP (Dynamic Host Configuration Protocol) 2. BOOTP (Bootstrap Protocol) The print server will use the last three methods to obtain its IP address automatically if its IP address is configured as Auto (0.0.0.0). AirLive WP-201G v2 User’s Manual...

  • Page 42: Dhcp

    The ip= tag should correspond to the IP address you want to assign to the print server. For example, a print server with the following configuration: Node ID: 0000B4010101 (this implies Ethernet address is 0000B4010101), IP address: 203.66.191.12 AirLive WP-201G v2 User’s Manual...

  • Page 43: Verify Print Server's Ip Address

    2. Create a spool directory for the printer in the same directory where spool directories are normally kept on the machine, such as /var/spool or /var/spool/lpd: mkdir /var/spool/lpd/pserverd chown daemon /var/spool/lpd/pserverd chgrp daemon /var/spool/lpd/pserverd chmod 775 / var/spool/lpd/pserverd AirLive WP-201G v2 User’s Manual...
  • Page 44 The sd= entry should correspond to the port name of the remote printer. The values should be one of p1, p2 or p3 depending on the printer port. The print server should now be available for printing from your UNIX host. AirLive WP-201G v2 User’s Manual...

  • Page 45: Chapter 7: Configuration Utility

    System Configuration: Print Server Network Ability Settings, Firmware Upgrade and Language setting. Wireless Configuration: Wireless LAN Configuration. Report: List the Status of All Available Print Servers on the Network. We will explain each function separately in the following section. AirLive WP-201G v2 User’s Manual...

  • Page 46: Search For All Available Print Server

    Group” on the left side of the window. You must select the print server you would like to configure from the list. The system will, at the same time, display the selected print server’s status on the right side of the window. AirLive WP-201G v2 User’s Manual...

  • Page 47: Status Of Print Server

    AppleTalk printer type, AppleTalk zone and print server printing ability, etc. You can refresh the print server’s status by pressing the “Refresh” button. You can restart the print server by pressing the “Reboot” button. AirLive WP-201G v2 User’s Manual...

  • Page 48: Setup Of The Print Server

    Double-click one of the icons to set up the selected print server. A screen will pop up to verify “User Name” and ‘Password” of the print server. The default values are as follows: User Name: admin ‐ Password: airlive ‐ AirLive WP-201G v2 User’s Manual...

  • Page 49: General Configuration

    Server Name, the name of the print server. You can use this name to identify the print server when you are searching for the print server by the administration and client utilities. User Name/Password is used to authenticate the administrator by the Web administration tool. 7.6 TCP/IP Configuration AirLive WP-201G v2 User’s Manual...
  • Page 50 If Auto is selected, the DHCP server of the print server will be enabled only when there is no other DHCP server within the network. When “Enable” or “Auto” is selected, you have to configure “Starting Address”, “Range”, “Subnet Mask”, “Gateway” and “DNS”. The print server will assign a unique IP for each client. AirLive WP-201G v2 User’s Manual...

  • Page 51: Netware Print Server Configuration

    NetWare server. You have to assign a printer queue for each printer port of this print server. NetWare Server is the name of the NetWare file server that provides printer queues. AirLive WP-201G v2 User’s Manual...

  • Page 52: Appletalk Configuration

    If you want to share the printer to all workstations in all Zones, you should enter only “*” in the “Zone Name” field. Printer Type, the type of printer attached to each printer port. You can get the printer type from the manufacturer of the printer. AirLive WP-201G v2 User’s Manual...

  • Page 53: Bonjour Configuration

    Contact: You can enter the print server administrator’s contact information here. This information will be displayed in the SNMP management tool. Location: You can enter the installed location of the print server here. This information will be displayed in the SNMP management tool. AirLive WP-201G v2 User’s Manual...

  • Page 54: Smb Configuration

    In the System configuration page, you can select to enable/disable each printing or management protocol, assign name for each printer port of this print server, upgrade the new firmware for this print server, and enable/disable wireless function. AirLive WP-201G v2 User’s Manual...

  • Page 55: Wireless Configuration

    Ethernet cable again, restart the print server and configure the print server through Ethernet until the wireless LAN settings are correct. The default settings of the print server wireless function are as follows: Mode: Infrastructure ‐ SSID: Default ‐ Channel: 11 ‐ AirLive WP-201G v2 User’s Manual...
  • Page 56 In the Infrastructure mode, you have to let the print server associate with an access point. You let the print server scan for an available access point automatically or manually assign the SSID of the access point you want to use. AirLive WP-201G v2 User’s Manual...
  • Page 57 “WEP (ASCII)” or “WEP (HEX)”. If you want to use WPA-PSK, you have to select “WPA-PSK”. If you want to use WPA2-PSK, you have to select “WPA2-PSK”. The wireless security setting should be the same with other wireless devices in the same network. AirLive WP-201G v2 User’s Manual...
  • Page 58 Key 1 to Key 4 – If the key length is 64-bit, enter 10-digit Hex values or 5-digit ASCII values as the ‐ encryption keys. For example: “0123456aef” or “Guest”. If the key length is 128-bit, enter 26-digit Hex values or 13-digit ASCII values as the encryption keys. For example, “01234567890123456789abcdef” or “administrator”. AirLive WP-201G v2 User’s Manual...
  • Page 59 8 to 63 digits of ASCII format to be the key for the authentication within the network. If “Hex” is selected, please enter 64 digits of Hex code which should be “0-9” and “A-F”. WPA2-PSK Mode: AirLive WP-201G v2 User’s Manual...
  • Page 60 If you manually assign the IP settings, you have to enter IP address, subnet mask and default gateway address. When you finish configuring the IP settings, click Next to confirm the IP address configuration. Click Save to save the wireless configuration. AirLive WP-201G v2 User’s Manual...

  • Page 61: Wizard

    Double-click the “Print Server Setup Wizard” and the setup wizard will guide you through all the setup process. Step 1: Set up the name of this print server, the port name for the print server and select to enable or disable the wireless function. AirLive WP-201G v2 User’s Manual...
  • Page 62 Step 2: Select to enable required printing protocol. Please refer to Section 7.12 for detailed information. Step 3: Setup the IP of this print server and the DHCP server. Please refer to Section 7.6 for detailed information. AirLive WP-201G v2 User’s Manual...
  • Page 63 Step 4: Setup the NetWare printing. Please refer to Section 7.7 for detailed information. Step 5: Select the Wireless Adapter mode and complete wireless LAN settings. The other procedures are the same with “Wireless” Setting in “Setup” screen. Please refer to Section 7.13 for more detailed information. AirLive WP-201G v2 User’s Manual...

  • Page 64: Report

    Click “Report” icon on the tool bar, the Report window will pop up. The report lists basic information of all available print servers on the network. The information includes Device Name, MAC ID, Model Type, Firmware Version and Status of print server. AirLive WP-201G v2 User’s Manual...

  • Page 65: Chapter 8: Web Management

    IP address of the print server, a login page will display. You have to enter the correct “User Name” and “Password” before going to the Web Management pages. Note: Default User Name is “admin”; default password is “airlive”. AirLive WP-201G v2 User’s Manual...

  • Page 66: Device Status

    System Information includes “Device Name”, “Print Server Name”, “Model Type”, “System Up Time”, “Firmware Version”, “MAC Address”, and the protocols enabled status, etc. 8.3.2 Printer This page lists information of printer connected to the printer port. AirLive WP-201G v2 User’s Manual...

  • Page 67: Tcp/Ip

    This page lists the SMB group setting of the print server. 8.3.5 SNMP This page lists the SNMP settings of the print server. It includes the settings of “SNMP System Contact” and “SNMP System Location”. AirLive WP-201G v2 User’s Manual...

  • Page 68: Netware

    The page lists NetWare settings, including “Polling Time”, “Use Bindery Mode”, “Name of the File Server” and “Port Attached Queue”. 8.3.7 AppleTalk This page lists AppleTalk settings, including “AppleTalk Zone Name” and “Printer Type” of printers connected to all print ports. AirLive WP-201G v2 User’s Manual...

  • Page 69: Bonjour

    Port Name is the name of the printer port. Each printer port has to be assigned a name. Then you can use this name to access the printer port. AirLive WP-201G v2 User’s Manual...

  • Page 70: Admin Password

    Password, enter the password you want to change to the print server. The password can be up to 8-digit alphanumeric format. The default password is “airlive”. Re-type Password, enter the password you want to change to the print server again.

  • Page 71: Wireless

    WLANs. Please make sure that the ESSID of all stations and access points in the same WLAN network are the same. Channel Number is the channel number of your wireless LAN. The channel number is fixed to number “11”. AirLive WP-201G v2 User’s Manual...

  • Page 72: Site Survey

    “WEP”. If you want to use WPA-PSK, you have to select “WPA-PSK”. If you want to use WPA2-PSK, you have to select “WPA2-PSK”. The wireless security setting should be the same with other wireless devices in the same network. WEP Security Mode AirLive WP-201G v2 User’s Manual...
  • Page 73 8 to 63 digits of ASCII format to be the key for the authentication within the network. If “Hex” is selected, please enter 64 digits of Hex code which should be “0-9” and “A-F”. Pre-Shared Key – The ‘Pre-Shared Key” is different from the key format selection. Please see above ‐ description. AirLive WP-201G v2 User’s Manual...
  • Page 74 8 to 63 digits of ASCII format to be the key for the authentication within the network. If “Hex” is selected, please enter 64 digits of Hex code which should be “0-9” and “A-F”. When you finish configuring the wireless security, click “Save & Next” to confirm the configuration. AirLive WP-201G v2 User’s Manual...

  • Page 75: Tcp/Ip

    IP”, “Range”, “DNS”, “Subnet Mask” and “Gateway”, and the print server will assign a unique IP for each client. Note that when “Auto” is selected, the DHCP server of the print server will be enabled only when there is no other DHCP server within the network. AirLive WP-201G v2 User’s Manual...

  • Page 76: Smb

    SNMP System Contact: You can enter the print server administrator’s contact information here. This information will be displayed in the SNMP management tool. SNMP System Location: You can enter the installed location of the print server here. This information will be displayed in the SNMP management tool. AirLive WP-201G v2 User’s Manual...

  • Page 77: Netware

    Attached Queue is the name of the printer queue on the NetWare server. The printer queue keeps all printing jobs waiting on the NetWare server. You have to assign a printer queue for each port of this print server. AirLive WP-201G v2 User’s Manual...

  • Page 78: Appletalk

    Bonjour enables automatic discovery of computers, devices and services on IP network. The service name will be seen by users on IP network. You have to designate the unique and friendly name to describe the AirLive WP-201G v2 User’s Manual...

  • Page 79: Save Settings

    8.5.2 Upgrade Firmware from Browser You can upgrade new firmware for this print server in this page. Click Browse to select the new firmware in your storage and then click OK, the firmware will be updated in several minutes. AirLive WP-201G v2 User’s Manual...

  • Page 80: Backup Setting

    To backup the print server setting to a “config.bin” file, select “Backup settings from Print Server”. 8.5.4 Restore System To apply the setting from the backup file, select “Restore settings from file” and specify a file to restore. AirLive WP-201G v2 User’s Manual...

  • Page 81: Chapter 9: Telnet Management

    Then the argument value will be displayed after the command. For example, if I want to get IP address of the print server, I type “get ip” command and the IP value “IP_ADDR=’192.168.2.2’” is displayed: admin# get ip AirLive WP-201G v2 User’s Manual...
  • Page 82 0: key 1 WEP_DEFAULT_KEY=0 1: key 2 2: key 3 3: key 4 key641 64 bit WEP key 1 admin# get key641 WEP64_KEY1=0123456789 key642 64 bit WEP key 2 admin# get key641 AirLive WP-201G v2 User’s Manual...
  • Page 83 NetWare server PORT1_QNAME=’PQ1’ applezone The name of AppleTalk zone admin# get applezone that this print server PORT1_APPLEAONE=’*’ joins to printertype1 The type of the printer admin# get printertype1 attached to this print PORT1_PRINTTYPE=’LaserWri server ter’ AirLive WP-201G v2 User’s Manual...
  • Page 84 SNMP_ENABLE=1 0: disable 1: enable NetWare Bindery printing is admin# get IPX enabled or disabled IPX_ENABLE=1 0: disable 1: enable LPR printing is enabled or admin# get LPD disabled LPD_ENABLE=1 0: disable AirLive WP-201G v2 User’s Manual...

  • Page 85: Modify Settings Values - "Set" Command

    Print server name set psname PS001 password Login password set password 1234 username Login username set username admin wlfunc Enable or disable the set wlfunc auto wireless LAN function. The value should be “disabled”, “enabled” or AirLive WP-201G v2 User’s Manual...
  • Page 86 The value should be 26 digit cdef0123456789a Hex value key1282 128 bit WEP key 2. set key1282 0123456789ab The value should be 26 digit cdef0123456789a Hex value key1283 128 bit WEP key 3. set key1283 0123456789ab AirLive WP-201G v2 User’s Manual...
  • Page 87 SNMPL The installed location of set SNMPL Room 301 this print server for SNMP port1 The port name of this print set port1 p1 server DHCPS Enable or disable the DHCP set DHCPS disable server. AirLive WP-201G v2 User’s Manual...
  • Page 88 The value should be “disabled” or “enabled”. Enable or disable IPP set IPP enable printing The value should be “disabled” or “enabled”. Enable or disable RAW set RAW enable printing The value should be “disabled” or “enabled”. AirLive WP-201G v2 User’s Manual...

  • Page 89: Other Commands

    “exit” command is used to leave the print server telnet management: Admin# exit 9.5.4 help “help” command is used to list all telnet management commands of the print server: admin# help set argument value get argument ipconfig reboot exit AirLive WP-201G v2 User’s Manual...

  • Page 90: Chapter 10: Ipp Printing

    You only need to perform Window’s standard Add New Printer procedure. Step 1. Click Start, choose “Settings” and select “Printers and Faxes”. Step 2. Click “Add a Printer”. Step 3. The “Add Printer Wizard” is displayed. Click Next. AirLive WP-201G v2 User’s Manual...
  • Page 91 Step 6. Select a suitable printer manufacturer and the printer model and click Next. If your printer is not in the list, click “Have Disk…” to install the driver of the printer. After installation, the printer model will be added to the list. AirLive WP-201G v2 User’s Manual...
  • Page 92 Step 7. Choose to set the printer to default or not. Click Next. AirLive WP-201G v2 User’s Manual...
  • Page 93 Step 8. You have added the network printer to the PC successfully. The information of the printer is displayed in the window. Click Finish. AirLive WP-201G v2 User’s Manual...

  • Page 94: Chapter 11 Windows Xp Sp2 Setup

    In case that you do not find any print server listed on the “Available Ports” in “Network Ports Quick Setup”, please follow the steps below. Step 1. Click Start, choose Settings and select “Network Connections”. Step 2. Right-click “Local Area Connection” and select Properties. Step 3. Select Advanced tab and click “Settings...” AirLive WP-201G v2 User’s Manual...
  • Page 95 Step 4. Select Exceptions tab and click “Add Program…” Step 5 Click Browse to add a new program. AirLive WP-201G v2 User’s Manual...
  • Page 96 Step 6. Open the “NPUtil” file from “C:\Program Files\PrintServer Utilities” (where C:\ is the system drive). Step 7. A new program “Network Ports Quick Setup” is displayed in the list, click OK. AirLive WP-201G v2 User’s Manual...
  • Page 97 Step 8 Click OK. You have completed the setting. The Windows XP SP2 will allow the incoming network connections activated by the program. AirLive WP-201G v2 User’s Manual...

Table of Contents