Program Radio Stations Manually; Select A Preset Radio Station; Product Information; Specifications - Philips AZ420/12 User Manual

Program radio stations
manually
Note
•
You can program a maximum of 10 FM radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
» [PROG] (program) blinks on the
display.
3
Press number buttons to allocate a
number to this radio station, then press
PROG to confirm.
• Station 1-5: Press
corresponding stations.
• Track 6-10: 1. Press
the display panel)
2. Press a second number button within 5
seconds to select the total station number.
(For example, if you press
station 8 will be selected.)
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

In tuner mode, press
buttons to select a preset radio station.
to select
3 4 5
. ("5" flashes on
5+
and then ,
5+ 3
/ or number
8 Product
information
Note
•
Product information is subject to change without prior
notice.

Specifications

General
Power Supply
Sound Power Output
Operation Power
Consumption
Standby Power
Consumption
Dimensions
- Main Unit
(W x H x D)
Weight
- Main Unit
Disc
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
S/N Ratio
100 - 240V~, 50/60
Hz;
or DC 4 X 1.5V /
SIZE "D" / R14 CELL
3.0 W per channel
x 2
17 W
<0.5 W
320 x 130 x 230
mm
1.5 kg
Semiconductor
12 cm/8 cm
CD-DA, CD-R, CD-
RW, MP3-CD
24 Bits / 44.1 kHz
<1%
60 Hz -16 kHz
>55 dB
EN
12