Charging The Battery - Pentax PocketJet User Manual

Charging the Battery

The battery MUST be charged prior to first use.
Follow these steps to charge a new battery and to
recharge a used battery.
Setting Up the Printer
Make sure the printer is connected to an AC power
outlet with the AC adapter and power cord. See page 8.
Make sure the printer is off.
Make sure the battery is installed. See page 6.
Press the main switch and hold it down for a few
seconds until the green BATTERY indicator light stays lit.
See Figure 6.
Press and hold down
a few seconds
FIGURE 6. Charging the battery.
This puts the printer in Charge mode, which completely
discharges the battery and then charges it.
The green BATTERY indicator light stays lit continuously
until discharging is completed; then it blinks until
charging is completed.
NOTE: During the charging cycle, you will not be able
to print.
When the printer finishes charging the battery, it
automatically turns itself off, and the green BATTERY
indicator light goes off.
The entire process should take about 70 minutes.
Main
switch
Green BATTERY light
9