Software Setup; Install The Operating System; Start Windows; Polo Motherboard Support Cd - Asus POLO SiS630(E) Ultra-AGP User Manual

Socket 370 motherboard

Table of Contents

5. SOFTWARE SETUP

You should always use the latest operating system and updates when using new

hardware to ensure full compliance. You may use any version of Windows 98, but

for Windows 95, you must use OSR 2.0 or later. For Windows NT 4.0, you must use

Service Pack 3.0 or later.

When you start Windows 98 for the first time after installing the motherboard,

Windows 98 detects all the Plug-n-Play devices. Follow the Add New Hardware

Wizard to install all the necessary device drivers. When prompted to restart, select

No, then follow the normal setup procedures on the screen.

To begin using the support CD, insert it into the CD-ROM drive. The support

installation menu should appear. If the menu does not appear, double-click or run

D:\ASSETUP.EXE (assuming that your CD-ROM drive is drive D).

NOTE: The support CD contents are subject to change at any time without notice.

ASUS POLO User's Manual

Table of Contents