Asus CUV4X-V User Manual page 69

Jumperfree pc133/vc133 agp pro/4x motherboard
Table of Contents

Advertisement

4. BIOS SETUP
USB Function [Enabled]
Set to [Enabled] if you want to use Universal Serial Bus devices. Configu-
ration options: [Disabled] [Enabled]
Primary VGA BIOS [PCI Card]
If your computer has both PCI and AGP VGA cards, this field allows you to
select which of the cards will act as your primary graphics card. [AGP Card]
uses the AGP card as your primary card. The default, [PCI Card], allows
your PCI graphics card to take precedence when detected. [On-Board] al-
lows you to use the onboard VGA as your primary graphics controller. Con-
figuration options: [PCI Card] [AGP Card] [On-Board]
PCI/PNP ISA IRQ Resource Exclusion
IRQ XX Used By ISA [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is
being used by a legacy (non-PnP) ISA card. The default value indicates
either that the displayed IRQ is not used or that ISA Configuration Utility
(ICU) is being used to determine if an ISA card is using that IRQ. If you
install a legacy ISA card that requires a unique IRQ and you are not using an
ICU, you must set the field for that IRQ to [Yes]. For example: If you install
a legacy ISA card that requires IRQ 10, then set IRQ10 Used By ISA to
[Yes]. Configuration options: [No/ICU] [Yes]
ASUS CUV4X-V User's Manual
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents