Installation - Topcom BUTLER S100 User Manual

Topcom Butler S100
1 Unit/Key description
1. ON/OFF switch
2. Melody/Registration key
3. Speaker ON/OFF switch
4. Speaker
5. Flash lights
6. Charger connection
2 Flash Lights
Color & Status of the LED's
Blinking fast
Green steady (left LED only)
Blinking slow
Blink 3 times every 5 seconds

3 Installation

Insert 3 rechargeable batteries (AA) inside the battery compartment of the handset.
Put the charger adaptor in the unit (right side). Charge the unit for a period of 24 hours before
using it the first time. To extend the battery life time, discharge the batteries completely from
time to time. As soon as the unit starts to blink 3 times every 5 seconds the battery is low,
you have to charge it again.
4
OFF ON
Butler S100
1
Meaning:
In registration mode
Out of range or not registered
During incoming call or setting the ring melody
Battery low
+
-
-
+
+
-
5
4
6
2 3
Topcom Butler S100