User Manual Table of Contents Page Introduction to the Comfort Digisystem Presenting the Microphone BT DM-80 Functions of the Microphone BT DM-80 Getting Started First Time Use Menu More Functions Radio Range and Channels Attached Accessories Other original Accessories Troubleshooting...
A microphone that not only serves as a conference micro- phone, but can also be connected to telephones. The DM-80 can be connected via Bluetooth to a mobile phone/ portable phone, and the microphone can be connected via a cable to a telephone using a 2.5 mm headset socket.
Functions of the Microphone BT DM-80 Pairing button Answering button Menu control Multifunction socket Function indicator On / Off Clip Microphone Answering button Charging socket Display Microphone BT DM-80 Microphone BT DM-80...
Getting Started Charging The Microphone BT DM-80 is chargeable. Charge the DM- 80 at least two hours before you use it for the first time. An empty battery is fully charged within two hours. During charging, the function indicator shows red and a lightning bolt appears through the battery symbol in the display.
The Microphone BT DM-80is a microphone for closer range. It works best within approx. 30 cm. The clip-on-microphone can be attached to your clothes with its clip. The DM-80 can be secured using the clip or hung around the neck using the neck pendant provided (two lengths).
Scroll up Press/select Scroll down To access the menu, press the menu control: Back Communication Channel Pairing Bluetooth Telephone Connections External mic Line in Telephone Mic gain Line gain Settings PIN code Charging Language Name Key lock About Microphone BT DM-80...
Page 8
If the message Channel combination not possible ap- pears during pairing, this indicates that the selected frequency is outside the frequency range within which the unit can transmit/receive. Check possible channels in the Microphone BT DM-80...
Page 9
(The only way of pairing units without a display, with the pairing button) You can activate the Pairing function via the pairing button. One brief press of the button opens the Pairing menu. Two brief presses activate the Send info function. Microphone BT DM-80...
Page 10
Here you can activate Bluetooth to be able to pair the Microphone BT DM-80 with a telephone or mobile. When BT only is selected, the transmitter is active only when the telephone call is connected via Bluetooth or a headset cable is connected and activated.
Page 11
For more information, see “More Functions”. Telephone Under the Telephone menu you can configure the DM-80 to function as a telephone headset. Connect the DM-80 to the telephone's multifunction socket via the headset ca- ble supplied. Please note:...
Page 12
Key lock Here you can activate the key lock and thereby lock all buttons. Once the key lock has been activated, Unlock keys? appears in the display. Select Yes to unlock. About Here you find software information. Microphone BT DM-80...
When a Bluetooth telephone has been successfully con- nected, the indicator flashes blue five times. During an ongoing telephone call, the indicator flashes blue every second second. When Reset BT is selected, the indicator flashes blue ten times. Microphone BT DM-80...
Page 14
The Microphone BT DM-80 can be connected to two Blue- tooth telephones at the same time. . During a telephone call the DM-80 is used as a hands-free that receives the sound and transfers it on to the call partner. The sound from the call partner's telephone is sent from the DM-80 to a paired Digisystem receiver.
Page 15
(activate voice dialling or re-dialling) using the answering button at the same time as Telephone is activated and the headset cable is connected to the DM-80. The reason for this is that it must not be possible for Bluetooth calls to be activated by mistake during an ongoing phone call.
In addition to channels 1-3, under Extended there are bands A-F, which require a licence in most European countries: B 854 - 863 MHz E 833 - 854 MHz F 865 - 872 MHz Microphone BT DM-80...
Disconnect the char- ger from the socket after use. Other original Accessories Boom microphone Headset microphone. Earworn microphone A microphone that is attached around the ear. Charging stand For other accessories, please visit our website, www.comfortaudio.com Microphone BT DM-80...
Loud hissing noise (no sound transfer) Check that the units are paired. The unit will not start during charging Disconnect the charger. Check the selection Auto power off under Charging in the menu. For more detailed troubleshooting, visit our website at www.comfortaudio.com Microphone BT DM-80...
Bluetooth or 48 hours in standby mode with Bluetooth transmission only. Battery: Chargeable Li-Polymer Charging time: Approx. two hours Microphones: Built-in, zoom and omnidirectional Input/output: Line in / TV microphone / headset cable Microphone BT DM-80...
13) Start listening at a low volume. 14) Too high a volume can seriously damage your Microphone BT DM-80...
Page 21
21) You must not change the battery yourself; please contact your point of purchase. CAUTION! Danger of explosion if battery is incorrectly replaced. 23) The product shall not be exposed to excessive heat such as sunshine, fire or the like. Subject to change Microphone BT DM-80...
Need help?
Do you have a question about the DM-80 and is the answer not in the manual?
Questions and answers