Setting The Clock; Clock And Sleep Timer; Alarm; Cd & Radio - GPX CC314B v958-02 User Manual

CLOCK AND SLEEP TIMER

Setting the Clock

Press the Power button to turn the unit off.
1.
2. Press and hold the Clock Set button until the display begins to blink,
then release the button.
Press the Tune +/- buttons to adjust the hour. Note the PM indicator will
3.
light when the hour is set in the PM.
Press the Clock Set button.
4.
5. Press the Tune +/- buttons to adjust the minute.
Press the Clock Set button to finish setting the time.
6.
Setting the Sleep Timer
Press the Power button to turn the unit on.
1.
2. Press the Sleep/Random button to set the sleep timer
(90, 60, 30, 15 min or OFF).
3. Once the set sleep time has expired the clock radio will
automatically power off.

ALARM

Setting the Alarm
1. Press the Power button to turn the unit off.
Press and hold the AL1 or AL2 button until the display begins to blink,
2.
then release the button.
Press the Tune +/- buttons to adjust the hour. Note the PM indicator will
3.
light when the hour is set in the PM.
4. Press the AL1 or AL2 button.
Press the Tune +/- buttons to adjust the minute.
5.
6. Press the AL1 or AL2 button.
Press the Tune +/- buttons to switch between Buzzer, Radio and CD.
7.
The display will indicate the following:
rAd for Radio, bU for Buzzer, and Cd for CD.
8. Use the Vol+/- buttons to adjust the volume of the alarm, except when
set to Buzzer.
9. Once the set alarm time is reached, the alarm will sound.
10. To set the other alarm, follow the above steps and choose the alarm not
currently set.
Snooze and Alarm Reset
After the alarm sounds:
Press the Snooze/Dimmer button to delay the alarm for several minutes.
Press the Power button to turn the alarm off until the set alarm
time is reached again.
Disabling the Alarm
Press the AL1 or AL2 button until the indicator is no longer lit. The alarm is
not off and will not sound.
LINE IN
Using the Audio Input
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the Line In Input on the side of the
unit and the audio output on an audio device.
Press the Power button to turn the unit on.
2.
3. Press the Source button to switch to Line In mode.
4. Use the native controls on the connected device to play your audio
through the unit.
INTERNATIONAL SUPPORT
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked
questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.gpx.com
Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des
réponses à des questions fréquemment posées, consultez la rubrique d'assistance sur:
www.gpx.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.gpx.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
OR
CD
Note: This unit is not compatible with MP3 CDs.
Loading and Playing a CD
Open the CD Door.
1.
2. Place a CD into the unit, label side facing up.
Close the CD Door.
3.
4. Press the Source button to switch to CD mode.
Press the Play/Pause button to begin playing the loaded CD.
5.
Programming a CD
1. Press the Stop button to stop the CD during play.
Press the Program button.
2.
3. "PROG" will begin to blink on the display.
Press the Tune +/- buttons to select a track.
4.
5. Press the Program button to save the selected track to the program.
6. Repeat steps 4 and 5 to program up to 20 tracks.
RADIO

Radio Reception

Extend the FM Antenna to improve FM radio reception. An AM antenna is
built into the clock radio. To improve AM radio reception, adjust the position
of the clock radio.
Tuning the AM or FM Radio
1. Press the Power button to turn the unit on.
Press the Source button to switch to Radio mode, then press the AM/
2.
FM button to select the desired frequency band.
Press the Tune +/- buttons to adjust the radio to the desired frequency.
3.
Press and hold the Tune +/- buttons to search for the next available
4.
frequency.
Press the Vol+/- buttons to adjust the volume.
5.
6. Press the Power to turn the radio off.
Saving and Playing a Station as a Preset
1. Tune to the desired frequency.
2. Press & hold the Preset button.
3. The display will flash.
4. Press the Tune +/- buttons to set as P01 - P10.
Press the Preset to finish setting the station as a preset.
5.
Press the Stop/Preset and Tune +/- buttons to cycle through preset
6.
radio stations.