Connecting Using Hdmi; About Hdmi - Pioneer VSX-1018AH-S Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-1018AH-S:
Table of Contents

Advertisement

Connecting your equipment

Connecting using HDMI

If you have an HDMI or DVI (with HDCP) equipped
component, you can connect it to this receiver using a
commercially available HDMI cable.
The HDMI connection transfers uncompressed digital
video, as well as almost every kind of digital audio that the
connected component is compatible with, including
DVD-Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby
TrueHD, DTS-HD Master Audio (see below for
limitations), Video CD/Super VCD, CD and MP3. See
About the video converter on page 14 for more on HDMI
compatibility.
HDMI/DVI-compatible monitor or
HDMI IN
COAXIAL
ASSIGNABLE
IN
HDMI
HDMI
1
(DVD)
IN
2
(CD)
OUT
OUT
OPTICAL
IN
1
BD IN
(TV SAT)
IN
2
(DVR1)
IN
IN
IN
3
ASSIGN-
(DVR2)
ABLE
OUT
ASSIGNABLE
1
-
3
DIGITAL
HDMI/DVI-equipped component
HDMI OUT
1
Use an HDMI cable to connect one of the HDMI IN
interconnects on this receiver to an HDMI output on
your HDMI component.
The HDMI indicator lights on the front panel when an
HDMI-equipped component is connected.
Note
1 • An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital Content Protection
(HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVIHDMI) to do so. A DVI connection, however, does not support
audio signals. Consult your local audio dealer for more information.
• If you connect a component that is not compatible with HDCP, an HDCP ERROR message is displayed on the front panel display. Some components
that are compatible with HDCP still cause this message to be displayed, but so long as there is no problem with displaying video this is not a malfunction.
• Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers.
• This receiver supports SACD, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio. To take advantage of these formats, however, make sure
that the component connected to this receiver also supports the corresponding format.
1
flat screen TV
S-
IN
IN
OUT
IN
OUT
VIDEO
1
-
2
VIDEO
RS-232C
DVD
TV SAT
DVR1
DVR
AUDIO
IN
IN
OUT
IN
OUT
CON-
IN
TROL
L
OUT
R
IR
ZONE2
MULTI CH IN
SPEA
IN
A
OUT
FRONT
CENTER SURROUND SURROUND BACK
1
L
12 V TRIGGER
2
(OUTPUT
12 V
TOTAL
R
50 mA MAX)
SUBWOOFER
VSX-1018AH
2
Use an HDMI cable to connect the HDMI OUT
interconnect on this receiver to an HDMI interconnect
on an HDMI-compatible monitor.
• The arrow on the cable connector body should be
facing left for correct alignment with the connector
on the player.
3
Use the INPUT SELECT button to select the HDMI
input.
You can also perform the same operation by using the
INPUT SELECTOR dial on the front panel or by pressing
HDMI on the remote control repeatedly.
• Set the HDMI parameter in Setting the Audio options
on page 69 to THROUGH if you want to hear HDMI
audio output from your TV or flat screen TV (no sound
will be heard from this receiver).
• If the video signal does not appear on your TV or flat
screen TV, try adjusting the resolution settings on
your component or display. Note that some
components (such as video game units) have
resolutions that may not be converted. In this case,
use an analog video connection.
• You can't hear HDMI audio through this receiver's
digital out jacks.

About HDMI

HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD players, DTV, set-top boxes, and other AV
devices. HDMI was developed to provide the
technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface
(DVI) in one specification. HDCP is used to protect digital
content transmitted and received by DVI-compliant
displays.
HDMI has the capability to support standard, enhanced,
or high-definition video plus standard to multi-channel
surround-sound audio. HDMI features include
uncompressed digital video, one connector (instead of
several cables and connectors), and communication
between the AV source and AV devices such as DTVs.
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
03
15
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-1018ah-k

Table of Contents