Advertisement
Fugenabdeckprofiloben um die Winkeldicke
ausschneiden und zwischen Gerät und
Möbelseitenwand eindrücken.
In die Befestigungs- und Scharnierlöcher
beiliegende Abdeckkappen (B) eindrücken.
Die Teile A, B, C, D abnehmen, wie in der Abb.
gezeigt wird.
Die Schiene (A) auf der Innenseite der Möbeltür
oben und unten auflegen (siehe Abb.) und die
Position der äußeren Bohrlöcher anzeichnen.
Nachdem die Löcher gebohrt wurden, die Schiene
mit den mitgelieferten Schrauben befestigen.
Die Abdeckung (C) in die Schiene (A) eindrücken,
bis sie einrastet.
12
D724
B
D726
B
A
C
D
PR266
A
PR166
A
C
PR33
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
For better use of space, the front half-shelves can lie
over the rear ones.
To permit storage of food packages of various sizes,
the door shelves can be placed at different heights.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the arrows
until it comes free, then reposition as required.
Useful hints:
wrap in polythene bags and place
on the glass shelf above the vegetable drawer.
these should be
covered and may be placed on any shelf.
these should be thoroughly
cleaned and placed in the special drawer(s)
provided.
these should be placed in
special airtight containers or wrapped in aluminium
foil or polythene bags to exclude as much air as
possible.
these should have a cap and should
be stored in the bottle rack on the door.
D338
To obtain the best performance from this appliance,
you should:
•
make sure that the commercially frozen
foodstuffs were adequately stored by the retailer;
•
be sure that frozen foodstuffs are transferred
from the foodstore to the freezer in the shortest
possible time;
•
not open the door frequently or leave it open
longer than absolutely necessary.
•
Once defrosted, food deteriorates rapidly and
cannot be refrozen.
•
Do not exceed the storage period indicated by
the food manufacturer.
17
Advertisement
