Table of Contents
Advertisement
MAINTENANCE
Before carrying out any maintenance operation,
always disconnect the plug from the wall socket.
Warning
This appliance contains hydrocarbons in its
cooling unit maintenance and recharging must
therefore only be carried out by authorised
technicians.
Defrosting
The freezer compartment will become progressively
covered with frost. This should be removed with the
special plastic scraper provided, whenever the
thickness of the frost exceeds 1/4".
During this operation it is not necessary to switch off
the power supply or to remove the foodstuffs.
However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried out
and it is advisable to carry out this operation when the
appliance is empty.
To carry out complete defrosting proceed as follows:
1. Remove any stored food, wrap it in several layers of
newspaper and put it in a cool place.
2. Turn the thermostat control
3. Leave the door open and insert the plastic scraper
in the special location to act as an extension
channel; pull out the drawer to collect the defrost
water (see Fig.).
4. When defrosting is completed, dry the interior
thoroughly.
Keep the scraper for future use.
Warning
Never use metal objects for defrosting your
appliance as it may get damaged.
Do not use a mechanical device or any
artificial means to speed up the thawing
process other than those recommended by
the manufacturer.
A temperature increase of the frozen food
shortens its safe storage period.
Periodical cleaning
Wash the interior of the appliance with lukewarm
water and sodium bicarbonate. Clean cabinet outer
surfaces with a silicone-wax spray.
The condenser and compressor should be cleaned
using a brush or a vacuum cleaner. This latter
operation will maintain the appliance's excellent
standards of performance and save energy.
to the « » setting.
8
PR001
Advertisement
Table of Contents
