Table of Contents
Advertisement
The control panel
Never turn the programme selector when the appliance is working.
C
V
A
APACITÉ
ARIABLE
UTOMATIQUE
ARRET
MARCHE
CUVE
PLEINE
2
1
3
1 On/off Pushbutton (marche)
Press the "Marche" pushbutton, the programme
starts : the control lamp lights on.
2 Control lamp
The control lamp lights on when the appliance is
working ("Marche" pushbutton pressed). It lights
off when the "Marche" pushbutton is pressed out.
3 Rinse hold pushbutton (arrêt cuve
pleine)
Press this button to leave the water in the drum
when the wash cycle has finished.
This option is available on synthetic and delicate
wash programmes. The
suspended in water after the final rinse which
helps to prevent creasing.
Do not use rinse hold with the wool programme.
Wool should be gently spin.
4 Spinning speed variator
It enables to select the spinning speed of your
washing machine from 400 to 900 rpm for all the
programmes. Thus, you can choose the spinning
speed suiting best to the nature of your laundry
and to the degree of humidity wished at the end of
the wash.
26
USE OF YOUR APPLIANCE
ESSORAGE tr/min
400
4
garments are left
Electrolux
PROGRAMME
1
5
5 Programme selector
It enables to select the most adapted programme
to the nature and the degree of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each pro-
gramme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a position off "I" or on a rinse hold
position (if the rinse hold pushbutton is selected).
Never turn the programme selector anticlockwise.
6 Temperature selector
It enables to choose the most adapted temperature
between cold ( ) and 90°C.
Choose the temperature which corresponds to the
chosen programme, with the help of the indica-
tions or the programme table, according to the
fibers and the fastness of the colours.
TEMPERATURE °C
900 T
EW 924T
6
Advertisement
Table of Contents
