Polaroid Digital Photo Frame User Manual page 6

Control Button Functions - continued
To access the Setup mode
Press the MENU/EXIT button twice.
Use the or
Use the or
Use or to make changes.
Press MENU/EXIT to save.
Button
MENU/EXIT
Viewing Pictures Individually
Button
OK
MENU/EXIT
Select Card Page
Button
OK
MENU/EXIT
Demo Slide Show
Demo pictures have been loaded into the Digital Photo Picture Frame. These pictures can be
viewed without inserting any memory cards. Power on the Digital Photo Frame and the demo
slide show will run automatically. We recommend using a USB cord no longer than three feet.
Connecting Your Digital Photo Frame to PC
Using a USB cable, you can connect your digital picture frame to a computer to transfer files
between the two devices.
With the frame turned off, connect the small end of the cable to the frame and the large end
to your computer. Turn the frame on and allow the computer a few moments to recognize the
device. The frame's internal memory and any memory cards inserted in the frame will appear
as external storage devices on the computer. Click on "Open folder to view files". You may add
or delete any photos from the internal memory of the device or memory cards from here.

XSA-00751A NA UM Sep 2.indd 6
Controls and Basic Instructions
to select the tool and press the OK button.
to scroll
Command
Up
Down
Next option
Previous option
Exit OSD Menu
Command
Previous Picture
Enter/Zoom in the Select Picture
Next Picture
Rotate Picture
Back to "Select Card" Page
Command
Left
Enter the "Photo Mode" or "Setting Mode"
Right
Back to "Select Card" Page
9/4/08 2:51:24 PM