Wireless network setup
If below screen appears, press the
within 2 minutes.
12
When the wireless network set up is completed, click Next.
13
After the installation is finished, click Close.
(WPS) button from the control panel
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad hoc wireless network by
following these simple directions.
Items to prepare
•
Network-connected computer
•
Software CD that was provided with your machine
•
A machine installed with a wireless network interface
•
USB cable
Creating the ad hoc network in Mac
Make sure that the machine is connected to your computer and
1
powered on.
Insert the supplied software CD into your CD-ROM drive.
2
2. Using a network-connected machine
127