Huawei FT2260 Set Up And Operation Manual page 5

Powering On and activating your Home Phone
Connect
1. Press the button to power on the device. When the device
is on, the power indicator will be blue.
2. Make sure you follow the instructions provided in the User
Manual or Quick Start Guide to set up your device.
3. Dial *228 from your home telephone. (The phone must be
connected to the Home Phone Connect device.)
• Press 1 and follow the prompts.
• Wait up to two minutes while your device is being programmed.
• You will receive a message that programming is complete.
IMPORTANT!
Your Wireless Home Phone Connect may not be compatible with
certain Home Security systems. Please check with your security
system provider to confirm the compatibility requirements of your
Home Security system.
Making Calls
1. Before making a call, make sure at least one signal strength
indicator ( is lit up (or blinking).
2. Place a call by entering the desired telephone number. The
number will be dialed automatically.
3. Hang up or return the phone to the receiver to ensure that you
can receive calls.
NOTE: Your Wireless Home Phone Connect requires 10-digit
dialing. Please use the three digit Area Code when dialing all
local and long distance numbers. Your Wireless Home Phone
Connect does not support rotary or pulse dialing phones.
Confidential and proprietary material for authorized HUAWEI personnel only. Use, disclosure or distribution of this material is not permitted to any unauthorized persons or third parties except by
written agreement.
Operations
Call Forwarding
Wireless Home Phone Connect allows customers to forward
calls to another phone number, including your mobile phone
or office number. Your home phone will not ring until you
deactivate the service. Airtime applies to forwarded calls
even if you send the call to wireline telephones. When
forwarding calls to phone numbers outside your local calling
area, you will be billed for any toll, long distance, and airtime
charges incurred. Additional per-minute charges may apply to
all forwarded calls. This feature is also known as
Call Forwarding
To Activate Call Forwarding:
1. Dial *72.
2. Immediately enter the phone number where you want calls
to be forwarded. (e.g. *72-212-123-4567).
3. You will hear a confirmation tone.
4. Hang up your home phone or return your phone receiver
to its base.
To Deactivate Call Forwarding:
1. Dial *73.
2. You will hear a confirmation tone.
3. Hang up your home phone or return your phone receiver
to its base.
Home Phone Connect Incompatibilities
• The Wireless Home Phone Connect does not support
incoming or outgoing fax service, Collect Calls (send and
receive), select Home Security Systems and DSL Dial- Up
(check with ISP).
.
"
Immediate
"