Huawei FT2260 Set Up And Operation Manual page 4

Set up of the Home Phone Connect
STEP 1: Installing the battery in the Home Phone Connect
NOTE: The battery is intended for backup purposes only (in the event of a
power failure). The device takes 3.5 hours to charge fully. The charge time
may be impacted by environmental factors. Talk time is about 2 hours and
standby time is about 36 hours, but the actual values vary with network
environment.
Remove the battery cover. Carefully insert the battery connection cable into
the battery port. The connection cable will click into place when correctly
inserted. Place the battery in the battery slot and return the battery cover.
STEP 3: Installing the power adapter on the Home Phone
Connect
Under normal usage, the device relies on the external power adapter for its
power supply. Insert one end of the power adapter into the DC input port,
and plug the unit into an AC wall outlet.
Confidential and proprietary material for authorized HUAWEI personnel only. Use, disclosure or distribution of this material is not permitted to any unauthorized persons or third parties except by
written agreement.
STEP 2: Installing the antenna on the Home Phone Connect
Make sure the device is turned Off. Align the antenna with the antenna port on
the device as illustrated below. Screw the antenna into the port, ensuring that
the connection is secure.
STEP 4: Connecting Home Phone Connect to a Telephone
The device provides two telephone ports. The ports use the same telephone
number.
Plug one end of a telephone cable (RJ11) into a telephone port and the other
end into the back of a home telephone or home telephone base unit.
NOTE: The telephone cable is not included.