Advertisement
HOW TO USE
1. Place the wedge end of the manual log splitter on the end of a vertically positioned log.
2. Raise the sliding hammer handle of the manual log splitter and keep both feet safety away from
base of log.
3. Push the sliding hammer handle down with quick force to drive the wedge end into the log.
4. NOTE: The manual log splitter is shipped with a safety screw must be removed before using the
manual log splitter.
CAUTION
1. Use only with tools and handles fully visible.
2. Always wear protective goggles and gloves.
3. FOR LOG SPLITTING ONLY-NO OTHER USE. DO NOT use this manual log splitter as a pry bar.
Misuse may result in serious injury or death.
MAINTENANCE
1. When not in use, secure the safety screw to the sliding hammer handle to keep the shaft from
moving.
2. Store the manual log splitter in a place which is dry and out of direct sunlight.
3. Clean the manual log splitter with dry and soft cloth.
Page of 4
3
Advertisement
