Subscribe to Our Youtube Channel
Related Manuals for Genius HCSD
Summary of Contents for Genius HCSD
-
Page 1: Package Contents
English 1. Package Contents The package contains the following items. In case there is any missing or damaged item, contact your dealer immediately. Car Recorder Bracket Quick Start Guide Car adapter 1 ... -
Page 2: Product Overview
1. To operate the device, press the corresponding buttons (9~14) according to the guide icons shown on the screen. 2. Insert the Micro HCSD card and remove the lens protection film if needed before recording. 3. The Micro HCSD card is not included. -
Page 3: Mount To Windshield
English 3. Mount to Windshield Step 2 Press and hold the PUSH button and pull to detach the b Press and hold the PUSH button and pull to detach the bracket base. Step 1 Attach the bracket to the DVR by turning the metal butterfly screw. -
Page 4: Adjust Device Position
English Press and hold the PUSH button and Press and hold the PUSH button and connect the base to the bracket. Release the PUSH button and make sure the base is securely locked in place. Press a nd hold the PUSH button to remove... - Page 5 English 5. Connect to Car Adapter Use only the supplied car adapter to power up the device and charge the built-in battery. Connect one end of the car adapter to the USB connector of the device. Plug the other end of the car charger to the cigarette lighter socket of your vehicle.
-
Page 6: Auto Power On/Off
English 6. Auto Power On/Off Once the vehicle engine is started, the device automatically turns on; the REC icon at the top of the screen on the left will start to blink. If the Automatic Record function is enabled, the recording will automatically start right after the device turns on. -
Page 7: Recording A Video
English 8. Recording a Video When the vehicle engine starts up and the Automatic Record function is enabled, the device automatically turns on and starts recording. Recording will automatically stop when the engine is switched off. Or, press the OK button to stop recording manually and press the OK again to start recording. -
Page 8: Deleting A File
English Press the button to select the desired setting and press the button to confirm the setting. Press the menu button to exit the menu. 12. Vibration detection Under recording mode, press the Menu and use mode button switch to Rec. Mode and use to select the vibration detection and press OK to make sure the sensitivity is High/Normal/Low or Off . - Page 9 In the recording mode, you can set the time to one, three or five minutes. When the time is up, a new file will start to be recorded. The following list shows you how many files can be stored depending on the size of your Micro HCSD card. Setting for...
Need help?
Do you have a question about the HCSD and is the answer not in the manual?
Questions and answers