BONITOR Mini Projector
Trouble Shooting
Slide the power switch to OFF mode and recharge MP201 with the included
AC adaptor / charger. LED light flashes once per second during recharging.
Full recharge takes probably 4-5 hours. LED light will stop flashing once the
battery is fully recharged.
Situations
No Projection
Blurred Image
MP201
Problems and Solutions
1. Power is off
Turn the projector on
2. No input signal
Turn your video device to video output mode
1. Not focused
Rotate the focus wheel until the projected image is
satisfactory
2. Out of range
Place MP201 within the distance range