Table of Contents
Advertisement
chapter 3
16
fun ctio ns
button when pressed. It will toggle between a parameter and the value for that
parameter.
The following parameters all share the same numerical value scheme. To
adjust the value, rotate the encoder to your desired number. The values range
from 0 to 999, (999 is equal to 33.3 seconds in NTSC and 40 seconds in
PAL). The numbers correspond to frames, 1 is equal to 1 frame and 30 is
equal to 30 frames (or 1 second).
Dissolve Length—The dissolve length controls
the length of a dissolve.
Effects Length—The effects length determines
the length of an effect.
Fade Length—The fade length controls the length
of a fade.
Program Strobe Rate—The program strobe rate
controls the strobe rate for the program bus. This
value will be displayed in the Freeze/Strobe con-
trols window.
Preview Strobe Rate—The preview strobe rate
controls the strobe rate for the preview bus. This
value will be displayed in the Freeze/Strobe con-
trols window.
Advertisement
Table of Contents
