Freeze/Strobe Controls; Comm/Power Status Lights - Global Streams CS-1000 User Manual

freeze/strobe controls

Here are the controls for the freeze and strobe rates for both the Program and
Preview buses.
Live When lighted, indicates that live video is playing
on the indicated bus.
Freeze Creates a still of the source on the selected video
bus.
Strobe Makes the video strobe (stutter step, like a strobe
light is going off) at a frame rate set by the indica-
tor to the right of the button. The strobe effect can-
not be used with stills.
Strobe Indicates the strobe rate. This can be set using
Rate Switcher and/or the SPGM/SPRV parameters in
the Effect Controls.

comm/power status lights

Communication status and power status are represented with lights on the
CS-1000. The power status light will be illuminated when there is power com-
ing to the CS-1000. When no power is detected, the status light will be dark.
The COMM status light detects communication between the CS-1000 and the
VideoNet card on the host PC. The light will remain illuminated when valid
Figure 3.2: Freeze/Strobe Controls
control surface
9
us er 's g uid e