Initial Settings - JVC LT-20C70BU Instructions Manual

Initial settings

When the TV is first turned on, it enters the initial setting
mode. Follow the instructions on the on-screen display to
make the initial settings.
OK
BACK
1 Make sure to set the VCR/TV/DVD switch to the
TV position.
• You cannot turn the TV on when the VCR/TV/DVD
switch is set to the VCR or DVD position.
2 Press the button on the remote control
After a short interval the power lamp changes from red
to green.
• Check that the AC plug on the power cord from the
TV is connected to AC outlet.
3 AUTO PROGRAM menu appears.
VCR/TV/DVD
Switch
4
P
LANGUAGE.
5 P
The on-screen display will then be in the Language you choosed.
6 P
country where you are.
7 P
A.P.S.
8 Press the OK button to start A.P.S.
The AUTO PROGRAM menu appears and received TV
channels are automatically stored in the programme
numbers.
Power lamp
After the TV channels have been registered in
the programme numbers, the PROGRAM
menu appears
• If you want to, you can now edit the programme
numbers using the PROGRAM function.
For details, see "To edit the PROGRAM menu" on
page 21.
Remote control sensor
AUTO PROGRAM
LANGUAGE ENGLISH
COUNTRY UNITED KINGDOM
A .P .S
: SELECT :MOVE
ress t he buttons to choose the
/
ress t he buttons to choose the ENGLISH.
/
ress t he and buttons to choose the
/ /
ress t
he buttons to choose the
/
Then press buttons.
/
A.P.S.
START
OK : START
A.P.S.
A.P.S. IS RUNNING
MENU : EXIT
• To cancel the AUTO PROGRAM function:
Press the MENU button.
LANGUAGE.
.
7