Use; Control Panel; Controls - Electrolux EW 1050 F Instruction Booklet

Use

Control panel

1 Detergent dispenser drawer
Programme Option buttons
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
depressing the "start pause" button.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds.
2 Spin button
By depressing this button you can reduce the final and
the intermediate spin speeds or select the "no spin"
option:
"spin reduction"
speed will be reduced as follows:
Cotton: from 1000 to 450 r.p.m.
Synthetics and wool: from 900 to 450 r.p.m.
Delicates: from 700 to 450 r.p.m.
"no spin" : by selecting this option all the
spinning phases are suppressed. To be used for
extremely delicate items.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programmes.
3 RINSE HOLD button
When selecting this option the water of the last rinse
is not emptied out, to prevent the fabrics from
creasing.
At the end of the programme the pilot light "end"
illuminates. To drain water, proceed as follows:
/
: by selecting this option the
turn the programme selector dial to position "O";
select programme
case reduce the spin speed by means of the
relevant button to adapt it to the fabrics to be
spun.
press "start pause" button.
4 SUPER RINSE button
Can be used with all programmes except the wool
and the handwash programme
machine will add 2 rinses to the selected
programme.
This option is recommended for people who are
allergic to detergents and in areas where the water is
very soft.
5 START PAUSE button
After having selected the required programme, press
this button to start the machine; the corresponding
pilot light stops flashing.
To interrupt a programme which is running, depress
the "START PAUSE" button: the corresponding pilot
light starts to flash.
To restart the programme from the point at which it
was interrupted, press the "START PAUSE"
button again.
6 DELAY START button
This button makes it possible to delay the starting of
the washing programme by 12, 8, 4 and 2 hours. The
delay you have selected is indicated by the coming
on of the corresponding light.
You must select this option after you have set
the programme and before you press the START
PAUSE button.
You can cancel the delay time at any moment,
8
(drain) or (spin). In this
. The