1
2
3
1 CD/DVD drive
4 system board
connector
9 Replace the bezel (see "Replacing the Bezel" on page 122).
10 Replace the computer cover (see "Replacing the Computer Cover" on
page 160).
NOTICE:
To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
11 Connect your computer and devices to their electrical outlets, and turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
2
data cable
5
screw holes in the
CD/DVD drive bay
Removing and Installing Parts
6
5
4
3
power cable
6
custom screws (2)
141