JVC AV-29DL6SGE Instructions Manual page 9

Initial settings
3
Confirm the language
Language for

LANGUAGE
on-screen analogue
channel displays and
menus (excluding the
DTV menu)
 When not using analogue channels
 When using analogue channels (or cable TV)
4
Set analogue channels
1
Register analogue channels
COUNTRY
(blue)
AUTO PROGRAM
14%
2
Check what was registered
EDIT
PR ID
AV
01 ZDF
02
03
04
05
06
07
08
09
3
Set T-V LINK
T-V LINK
DOWNLOAD TV RECORDING DEVICE
5
Initial setting is complete
 Edit digital channels Editing digital channels (P. 45)

 If digital channel reception is poor
 If analogue channel reception is poor
 Some digital channels cannot be watched on this TV.
13
(continued)
 When change a language
select
@
 
⁄
 
 When change a country
select
CH 28
 Edit analogue channels  Confirm
CH/CC
in "Editing analogue
 @
CH 21
CH 22
channels" (P. 47)
CH 23
CH
24
CH 25
CC 02
CC 03
CC 04
CC 05
 When not using
 When using "T-V LINK"
"T-V LINK"
If "FEATURE NOT

AVAILABLE" appears :
Is a "T-V LINK" compatible

device connected to "EXT-2"?
 Is the device turned on?
When the digital channel reception is poor (P. 14)

Troubleshooting (P. 49)

(P.54)

When the TV cannot find the digital channels
Check the following points
 Is the TV connected correctly to the aerial?
 Change the direction of the indoor aerial.
 Is there a digital channels transmission tower nearby?
 Turn "ATTENUATOR" to "ON" (P. 34), since the radio waves are too strong.
Register digital channels again "Service Scan" (P. 43)
 
 If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.
When the digital channel reception is poor
The "Missing or weak signal" message appears.
Check the following points
Is the TV connected correctly to the aerial?

Change the direction of the indoor aerial.

 Is there a digital channels transmission tower nearby?
 Turn "ATTENUATOR" to "ON" (P. 34), since the radio waves are too strong.
 Check digital channels signal  Signal Check (P. 43)
 If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.
Consult your retailer

 Consult your retailer
14