Download Print this page

DALLEE ELECTRONICS Speakers Manual page 7

In locomotive steam chuff sound for various track power
Hide thumbs Also See for Speakers:

Advertisement

Using dual sound systems with DC track power, LocoMatic™ controller, and an optional auxillary amplifier.
speaker output
Gray
All main sounds except
exhaust chuff would be
produced by this sound unit.
White
Black
connect White and Black wire together on
SYNC input as shown. This will prevent
the chuff from playing in this unit.
speaker output
Gray
Chuff sounds
produced by this
sound unit.
This unit, #711, will produce the exhaust chuff sounds. Input J4 would
be hard wired to J2 gray as page 2 explains. Inputs for J5 would not be
connected. If using the LocoMatic™ Controller you would connect pin 1
of J3 on this unit to the upper unit as shown on page 3 and 4. You will
also have to connect the choke as shown on those pages.
Dual Systems without an amplifier are connected in similar fashion except for the
amplifier and joining of speaker wires through 1k resistors. Instead each sound
system must have it's own speaker.
Red
Black
White
+
Red
Gray
+
Red
Gray
Audio input. Connect as shown to
resistors and gray speaker wire from
sound system. Do not use the red
speaker wire from the sound system.
This wire does not get connected!
1k, 1/4w
Connect motor
M
if present
#524 DPST switch.
Switch shown in the OFF position.
Drawn as a SPST.
ON / OFF
switch
1k, 1/4w
(brn,blk,red)
Black
7
lighting
circuits
either rail may be used. Right / Left
only used for reference.
DC battery power input.
Input voltage of 12 to 24 volts DC.
Connect to the same power that is
powering the sound system. For best
+
Red
amplifier operation, use 12 to 18 "AA"
batteries or larger type.
Gray
If track power and battery operation is
desired, as shown on page 4, connect
power to batteries / track as shown on
page 4. All battery power must go to the
sound systems and amplifier.
Red
1
2
Black
3
Gray
More than one power amplifier can be used. To do so
connect the input wires (gray) in parrallel from the
amplifier to the sound systems gray speaker wire or
use one amplifier for each sound system.
Right Rail
pickup
Left Rail
pickup
use
8 ohm
speaker

Advertisement

loading

Related Products for DALLEE ELECTRONICS Speakers