Table of Contents
Advertisement
The image is too blurred.
The image is too dark.
Sound playback is not
available when viewing the
movie on the LCD display.
Noise occurs on my camera
when viewing the image on
the LCD display or on the
computer.
When connecting the camera to your computer
The driver installation failed.
A conflict with other
installed camera or capture
device.
The movie cannot be
played on my computer.
Noise occurs on my
computer when using Video
Conferencing.
Please adjust the focus (refer to page 6).
You may need to take pictures or movies
in the place with adequate light or use the
flash strobe.
This situation is normal. If you want the
movie with sound playback, please copy
the movie to your computer and view it on
the computer.
Set the frequency matching the place you are.
Please refer to the "More on frequency"
section on page 27.
Please remove the driver and other
related programs. Follow the installation
steps in this manual to reinstall.
Install the driver before inserting the
USB cable.
If you have any other camera or capture
device, completely remove the camera
and its driver form the computer to avoid a
driver conflict.
Please install Quicktime.
Set the frequency matching the place you are.
Please refer to the page 27.
~ 25 ~
Advertisement
Table of Contents
