Encryption - Belkin F1UP0001 User Manual

P74390ea_F1UP0001_man.qxd
Web Interface – Encryption
IMPORTANT: Use the following encryption information only if your
This menu allows you to activate your Print Server's encryption feature, which
is determined by your existing LAN encryption setting.
To set encryption for your Print Server choose the matching setting in the
dialog box above. The following briefly explains the various settings your
software makes available:
• 64-bit manually: Selecting this setting will allow you to enter your
64-bit keys, if your wireless network uses 64-bit encryption (see dialog
box on the next page).
• 64-bit automatically: Selecting this setting will allow you to enter a pass
phrase to automatically generate encryption keys for your Print Server.
(Caution: This choice can generate new keys that will not function with an
existing network. If your network keys [in your router] are already set, use
manually instead.)
• 128-bit manually: Selecting this setting will allow you to enter your
128-bit keys, if your existing wireless network is encrypted using
128-bit encryption.
1/6/04
WEB CONFIGURATION
network is encrypted. If it is not, leave the encryption
mode ("WEP Mode" in the dialog box illustrated
below) set to its default, "Disabled".
3:09 PM Page 16
16
•
W
T
T
•
•
•
•
N