Belkin F1UP0001 User Manual page 18

P74390ea_F1UP0001_man.qxd
Web Interface – IP Address
This menu allows the user to set a Static IP address, or to set the Print Server
to obtain an IP address automatically as a DHCP client. Although Belkin
designs the Print Server to obtain an IP address automatically, running the
Wizard will change the IP address to static. Static is the recommended method
of operation, since the computer will be configured to print to a specific IP
address which, if changed, would make the Print Server inoperable.
Note: When choosing an IP address manually, be sure to choose a unique IP
address in the same domain (first three sets of digits the same) as the
gateway of your network.
1/6/04 3:09 PM
WEB CONFIGURATION
14
Page 14
W
T
•
•
•
•
•