Installation; Built-In Model; Electrical Connections - Husqvarna QN 4039 Instruction Manual

Hide thumbs Also See for QN 4039:
Table of Contents

Advertisement

QN 4039
• When you unpack the oven, check that
the product is free from damage.
Damage or any missing parts must be
reported immediately to the retailer. The
oven, parts of the oven or the accessori-
es may be wrapped by a protection foil.
If so, you must remove this foil before
using the oven. Do not leave packing
material so that small children can play
with it. This can be hazardous.
• Do not use your appliance immediately
(wait approx. 1-2 hours) after transfer
from a cold place to a warm place as
condensation may cause a malfunction.
• This oven can be used as a free stan-
ding oven or built-in using the kit avail-
able with the oven. To install the oven in
a kitchen cabinet follow the instructions
supplied with the building-in kit. The
oven should be in-stalled on a flat, level
surface at least 85 cm above floor level.
The surface must be strong enough to
safely bear the weight of the oven, and
the contents. To avoid the possibility of
causing vibration or noise, the oven must
be in a stable position.
• Be sure to install the oven away from
heat and water sources.
• Do not block air vents on the top and the
sides of the cabinet nor place any artic-
les on the top of the oven. A gap all
around the oven is necessary : 20 cm
a b o v e
the oven
and any
objects,
5 cm on
the sides
5 cm
and
10
cm behind the oven. If air vents are
blocked during operation, the oven may
overheat, and this may lead to malfunc-
tioning.

Installation

20 cm
5 cm
8
• This oven does conform to EEC require-
ments* of radio interference suppression,
but some interference may occur if it is
placed too close to a radio or TV, so
keep them as far apart as possible.

Built-in model

• To install the appliance in a kitchen cabi-
net, use the appropriate mounting frame,
kit number EBR/BF 624 for model QN
4039. When building into a high cabinet,
you may use the liftdoor. Note the rele-
vant information for installation and
connection given in the operating
instructions.
Attention ! Never operate the microwave
oven with the lift door closed. Such ope-
ration would damage your appliance and
invalidate the guarantee.
Electical connections
• The oven is delivered with the power
cord and a plug for 220-240 V, 50Hz,
earthed socket outlet.
• Earth protection minimizes the risks
should a short-circuit occur. Check to
ensure the voltage of the oven matches
the supply. N.B. If the oven is connected
to the socket via an extension cord,
make sure the cord is earthed.
This appliance must not be used on a non-
earth protected power supply. Contact an
electrician if you are uncertain regarding
electrical connection of the oven or pro-
vision of earth protection of the supply.
• Microwave power output : 900W
• This appliance complies with E.E.C.
directive No. 87/308 of 2.6.87 relative to
radio interference suppression.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents