Remote Control Functions - Harman Kardon TU 980 Owner's Manual

Remote Control Functions

0
1
2
3
4
5
8
0
Standby/Power On
1
Numeric Keys
2
Clear Button
3
Info/RDS Button
4
Auto Tuning Button
5
Scroll Button
6 REMOTE CONTROL FUNCTIONS
A
9
6
7
6
Function/FM Mode Selector
7
Band Selector
8
Select Button
9
Memory Button
A
Standby/Power Off
0 Standby/Power On: Press this button to
turn on the TU 980. Note that the Power
Indicator next to the switch will turn blue
when the unit is on.
1 Numeric Keys: These buttons serve as a
ten-button numeric keypad to enter tuner preset
positions or to tune stations directly.
2 Clear Button: Press this button to clear
presets from your station list.
3 Info/RDS Button: Pressing this button will
change the content of the lower display line of
the Information Display as well as signal error
rate and software version. (See page 9 for more
info).
4 Auto Tune Button: In DAB mode, press
this button to automatically scan all available
stations.
5 Scroll Buttons: Press
L to tune lower
frequency stations and K to tune higher
frequency stations. When a station with a strong
signal is tuned, the Information Display
will read . Press again briefly to tune to
TUNED
the next frequency increment in Manual Tune
Mode, or keep pressed for automatic search for
the next station with a signal strong enough for
acceptable reception in Auto Tune Mode. These
buttons also control the parameters in the
different menus, like the Control Ring
the front panel.
6 Function/FM Mode Selector: In DAB
mode, pressing this button will activate station
order, preset tune, Dynamic Rate Control or
manual tune features. In FM mode, press this
button to select the stereo or mono mode for FM
tuning. In the stereo mode, the word
will be shown in the Information Display
and stereo reception will be provided when
stations are transmitting stereo signals. In the
mono mode, the left and right signals from stereo
broadcasts will be mixed together and
reproduced through all channels. Select
for better reception of weak signals.
7 Band Selector: Press this button to change
between the DAB, FM and AM frequency bands.
8 Select: In FM or AM mode, press this
button to select Auto Tune, Manual Tune or Preset
Tune.
9 Memory Button: Press this button to open
the memory position that stores a preset location
in the tuner. 99 DAB presets can be stored, as
well as 30 FM and 30 AM presets. (See page 9
for more information on tuner presets.)
A Standby/Power Off: Press this button to
turn the unit off (to Standby).
on
STEREO
,
MONO