Custom Page Length - Axis HP MIO User Manual

System language
Section 3: Configuration
Page lenght
Emulation
Custom Page Length (PAGELENGTH)
Note:
Page Length
Selections
Note:
26
This selection will only appear if you have selected CUSTOM as Page
Size.
The selected page length must match the length of the actual paper
you are using in order to get correct printouts. The page length is
displayed in units of 0.01 inches.
The default value is the page length for the last selected page size (if you
changed from LETTER to CUSTOM, the default length is 1100,
corresponding to 11.00 inches).
Select

Custom Page Length

You can select any page length from 0 to 1999, corresponding to
0.00 – 19.99 inches.
Pressing the + or - key changes the value in steps of 0.01 inches. By
holding down the key for a few seconds, the value changes more
rapidly, first in steps of 0.10 inches, then in steps of 1.00 inches.
PAGELENGTH=1100
S
AXIS HP MIO User's Manual
*