Channel Lock - Acoustic Research ARRS05G User Manual

Channel Lock

By default, in TV mode the remote control's channel-control
capabilities are locked to the cable box or satellite receiver.
The affected keys are 1 through 0, CH+, CH-, and LAST. This will
guarantee that you do not inadvertently change a channel on your
TV. However, you can deactivate this feature to allow full access to
these keys in TV mode.
To cancel the channel lock for all modes:
To relock channel control:
1. Press and hold SET until the device key
blinks twice (the red LED blinks once,
then twice).
2. Press 9 7 3.
3. Press CH- once. The red light blinks four
times.
Now the remote control will provide TV
and VCR channel-control capabilities
while in the TV or VCR mode.
Press and hold SET until the device key
1.
blinks twice (the red LED blinks once,
then twice).
2. Press 9 7 3.
3. Press CH+ once.
4. Press the key for the device you want to
use to change channels in all modes.
Now, regardless of what mode you
select, the channel keys will only change
channels on your set-top box.
13