Connecting Wavestation To The Pc; Reading Files From Wavestation On A Pc - Teledyne WaveStation 3000 Operator's Manual

WaveStation 3000 Function and Arbitrary Waveform Generator

Connecting WaveStation to the PC

To re-establish the link between the WaveStation and your PC after the initial software installation:
1. Power on WaveStation.
2. With the PC turned on, connect the USB Type B-A cable from the rear USB B port on the WaveStation to a
USB A port on the PC.
3. Launch the WaveStation PC software.

Reading Files from WaveStation on a PC

You can retrieve any stored or arbitrary waveform file from the WaveStation and send it to the WaveStation
PC software for modification.
Complete the preliminary steps to:
Install WaveStation PC drivers and software.
l
Make the connection
l
Starting from WaveStation
1. Follow the steps to
2. In the WaveStation PC Software, choose Communication → Read wave from the menu bar.
3. Select the device you want to read the wave from the Device List. The software detects multiple devices.
4. Select the stored or built-in waveform from the Wave List. You will see all the wave files stored on the
device.
34
from WaveStation to the PC.
generate an arbitrary waveform, choosing either one of the Built-In or Stored Wforms.
922869 Rev B