Control Panel - CONSTRUCTA Washing machine Instruction Manual And Installation Instructions

Control panel

Release
Press to open the appliance cover.
4
1. Select a programme
Switches on / off the washing machine.
Can be turned in both directions.
The programme selector cannot be turned when
the programme is in progress. The programme
sequence is controlled electronically.
3. Set the spin speed (if desired)
Variable; must click into place at L".
4. Press buttons for additional functions
(where required to supplement the programme)
e":
K":
I":
It is also possible to combine the additional functions at any time.
The control light above the option button lights up when the
respective additional function is active.
To cancel the additional function: Press the button again.
5. Press the M" button
The washing process begins (programme must have been
selected).
2. Control lights illuminate
End" when programme is finished.
Active" when M" is pressed.
Ready" when programme is selected.
Flashing control lights = operating fault.
Reduces creasing.
Additional rinsing cycle.
Shortened programme duration.