After Sales Service - CONSTRUCTA Washing machine Operating Instructions And Installation

After-Sales Service
22 en
m Before calling the After-Sales Service, check whether you
can solve the problem yourself. (See the «Faults with simple
remedies» section).
This will avoid unnecessary cost as technical expenses are
not covered by the warranty.
! If a fault occurs despite following the instructions given
above, disconnect the appliance, pull the plug out of the
socket and close the tap, then contact the After-Sales
Service.
When requesting the assistance of the After-Sales Service,
remember to give the model number (E-Nr.) and the serial
number (FD). Both numbers are found on the rating plate,
located inside the door frame of the door and on the plate
located behind the kick panel on the front of the machine at the
bottom.
Note the numbers of your machine here
E-Nr.
Model number
Giving the correct model and serial numbers helps to avoid
wasted journeys for our technicians. Which will save you
unnecessary expense.
FD
Serial number