Hi / Lo Temperature Alarm; Reset; Precautions - Oregon Scientific RAR681 User Manual

HI / LO TEMPERATURE ALARM

An alarm can be set to sound if the sensor set to
channel 1 records above or below a temperature of
your choice.
To set alarm ON / OFF:
1. Press and hold TEMP HI / LO
2. Use or to select high temperature, press
TEMP HI / LO to confirm.
3. Use or to select low temperature, press
TEMP HI / LO to confirm.
4. Press to activate or deactivate the high / low
temperature alarm.
To silence the hi / lo temperature alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature is exceeded again.

RESET

Press RESET to return the main unit to the default
settings. To reset the sensor, remove and then re-insert
the batteries.

PRECAUTIONS

This product is engineered to give you years of
satisfactory service if you handle it carefully. Here are
a few precautions:
•
Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
RAR681_M_EN_R1.indd 7
•
Do not clean the unit with abrasive or corrosive
materials.
•
Do not subject the unit to excessive force, shock,
dust, temperature or humidity, which may result in
malfunction, shorter electronic life span, damaged
battery and distorted parts.
•
Do not tamper with the unit's internal components.
.
Doing so will invalidate the warranty on the unit and
may cause unnecessary damage. The unit contains
no user-serviceable parts.
•
Only use fresh batteries as specified in the user's
instructions. Do not mix new and old batteries.
•
Do not use rechargeable batteries.
•
Remove batteries when storing the product for a
long time.
•
Due to printing limitations, the displays shown in
this manual may differ from the actual display.
•
The contents of this manual may not be reproduced
without the permission of the manufacturer.
•
Do not dispose this product as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary.
NOTE The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
7
2006.6.21 3:37:39 PM