Power Supply Cord; Ground Fault Circuit Interrupters - Generac Power Systems 02010-0, 04164-0 Owners And Installation Manual

2.7.6 POWER SUPPLY CORD

The power supply cord must comply with all applic-
able codes, standards and regulations. It must be
large enough to handle the full amperage to which it
will be subjected.
PRIMEPACT 50 Recreational Vehicle Generator
Figure 2.18 – Transfer Switch Isolation Method
Figure 2.19 – Installation With Isolation Receptacle
Section 2 – Installation

2.7.7 GROUND FAULT CIRCUIT INTERRUPTERS

The National Electrical Code (NFPA 70, 551-7)
requires that you install ground fault circuit inter-
rupters (GFCIs) on all external and some internal
electrical receptacles. Contact your manufacturer or
dealer for recommendations.
Generac Power Systems, Inc. 33
®