Surround Display Feature - ASROCK H77WS-DL User Manual

Hide thumbs Also See for H77WS-DL:

Table of Contents

2.8 Surround Display Feature

This motherboard supports surround display upgrade. With the internal VGA output

support and external add-on PCI Express VGA cards, you can easily enjoy the ben-

eﬁ ts of surround display feature.

Please refer to the following steps to set up a surround display environment:

1. Install the PCI Express VGA cards on PCIE1 slot. Please refer to page 20 for

proper expansion card installation procedures.

2. Connect a VGA monitor cable to the VGA port on the I/O panel. Then connect

other monitor cables to the corresponding connectors of the add-on PCI Express

VGA cards on PCIE1 slot.

VGA port

3. Boot your system. Press <F2> or <Del> to enter UEFI setup. Enter "Share

Memory" option to adjust the memory capability to [32MB], [64MB], [128MB],

[256MB] or [512MB] to enable the function of VGA. Please make sure that the

value you select is less than the total capability of the system memory. If you do

not adjust the UEFI setup, the default value of "Share Memory", [Auto], will

disable VGA function when an add-on VGA card is inserted to this motherboard.

4. Install the onboard VGA driver and the add-on PCI Express VGA card driver to

your system. If you have installed the drivers already, there is no need to install

them again.

5. Set up a multi-monitor display.

Table of Contents