BMW 5 series Owner's Manual page 135

5 series sedan
Hide thumbs Also See for 5 series:
Table of Contents

Advertisement

The range of the sensors is represented in col‐
ors: red, green and yellow.
If the backup camera image was selected last, it
again appears on the display. To switch to PDC:
1.
"Rear view camera" Select the symbol
on the Control Display.
2.
Press the controller.
The setting is stored for the remote control cur‐
rently in use.
System limits
Limits of ultrasonic measurement
The detection of objects can reach the physical
limits of ultrasonic measurement, e.g.:
With tow bars and trailer hitches.
With thin or wedge-shaped objects.
With low objects.
With objects with corners and sharp edges.
Low objects already displayed, e.g., curbs, can
move into the blind area of the sensors before or
after a continuous tone sounds.
High, protruding objects such as ledges may not
be detected.
False warnings
PDC may issue a warning under the following
conditions even though there is no obstacle
within the detection range:
In heavy rain.
When sensors are very dirty or covered in
ice.
When sensors are covered in snow.
On rough road surfaces.
In large buildings with right angles and
smooth walls, e.g., in underground garages.
In heavy exhaust.
Due to other ultrasound sources, e.g.,
sweeping machines, high pressure steam
cleaners or neon lights.
Online Edition for Part no. 01 40 2 903 008 - 07 12 490
Driving comfort
Malfunction
A Check Control message is displayed.
The range of the sensors is shown as a shaded
area on the Control Display.
PDC has failed. Have the system checked.
To ensure full operability:
Keep the sensors clean and free of ice.
When using high-pressure washers, do not
spray the sensors for long periods and main‐
tain a distance of at least 12 in/30 cm.
Surround View
The concept
Surround View includes the following systems:
Backup camera, refer to page 135.
Side View, refer to page 140.
Top View, refer to page 138.
It assists the driver when parking, maneuvering
and on blind driveways and intersections.
Backup camera
The concept
The backup camera provides assistance in park‐
ing and maneuvering backwards. The area be‐
hind the vehicle is shown on the Control Display.
Notes
Check the traffic situation as well
Check the traffic situation around the ve‐
hicle with your own eyes. Otherwise, an accident
could result from road users or objects located
outside the picture area of the backup camera.◀
Controls
135

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Activehybrid 55 series

Table of Contents