How To Manually Set Up Your Wap300N - Linksys WAP300N User Manual

Linksys WAP300N
How to connect a device using its Wi-Fi Protected Setup PIN
Use this method if your device has a Wi-Fi Protected Setup PIN (Personal
Identification Number)
To connect a device using the device's Wi-Fi Protected Setup PIN:
Wireless > Basic Wireless Settings
1. Log into the browser-based utility (see "How to open the browser-based
utility" on page 8)
2. Click the Wireless tab, then click the Basic Wireless Settings page
3. For Configuration View, select Wi-Fi Protected Setup™
4. Enter the PIN from the device into the PIN field on the WAP300N's Wi-Fi
Protected Setup screen, then click Register
The Wi-Fi Protected Setup status, wireless band, network name (SSID),
and security mode are displayed at the bottom of the screen
How to connect a device using the WAP300N's Wi-Fi Protected
Setup PIN
Use this method if your client device asks for the WAP300N's PIN (Personal
Identification Number)
To connect a device using the WAP300N's Wi-Fi Protected Setup PIN:
Wireless > Basic Wireless Settings
1. Log into the browser-based utility (see "How to open the browser-based
utility" on page 8)
2. Click the Wireless tab, then click the Basic Wireless Settings page
3. For Configuration View, select Wi-Fi Protected Setup™
4. On the client device, enter the PIN listed on the WAP300N's Wi-Fi
Protected Setup screen It is also listed on the bottom of the WAP300N In
the example below, the WAP300N's PIN is 32744781
The Wi-Fi Protected Setup status, wireless band, network name (SSID),
and security mode are displayed at the bottom of the screen

How to manually set up your WAP300N

To manually set up your access point:
Wireless > Basic Wireless Settings
1. Log into the browser-based utility (see "How to open the browser-based
utility" on page 8)
2. Click the Wireless tab, then click the Basic Wireless Settings page
3. For Configuration View, select Manual
Setting Up: Basics
10