Mini Cooper Owner's Manual page 132

>
MINI Mobility System, refer to the following
section
> Run-flat tires, page
>
Tire change with space-saver spare tire,
page 132
MINI Mobility System with onboard
vehicle tool kit and tire change set*
Preparations
Use of the MINI Mobility System may be ineffec-
tive if the tire puncture measures approx. 1/8 in/
4 mm or more. Contact the nearest MINI dealer
if the tire cannot be made drivable with the
Mobility System.
Do not remove foreign bodies which have pen-
etrated the tire if possible.
Follow the instructions on using the Mobil-
ity System found on the compressor and
the sealant bottle.<
Remove the adhesive label for the speed limit
from the sealant bottle and affix it to the steer-
ing wheel.
The Mobility System with onboard vehicle tool
*
kit and tire change set
floor mat in the cargo bay.
1 Sealant bottle
*
2 Hexagon wrench
*
3 Extractor hook
*
4 Vehicle jack
5
Wheel stud wrench
6
Flat screwdriver/Phillips screwdriver, towing
eyelet
7
Compressor
130
Online Edition for Part no. 01 41 2 604 483 - © 02/10 BMW AG
114
is located under the
Sealant and compressor
1 Sealant bottle and adhesive label with speed
limit
2
Filling hose
Note the use-by date on the sealant bot-
tle.<
3 Holder for the sealant bottle
4 Compressor
5
Plug and cable for the socket in the vehicle
interior, page 88
6 Connection hose to connect the compressor
and sealant bottle or the compressor and
wheel
7 On/off switch
8 Pressure gauge for indicating the tire infla-
tion pressure
9 Release button for reducing the tire inflation
pressure
Connector, cable and connection hose are
stored in the compressor housing.
Using the Mobility System
To repair a tire puncture with the Mobility Sys-
tem, proceed as follows: